Phone Icon0208 953 1211       Email Iconinfo@conro.com

 x 
Cart empty

Surclean Ecosolve 300

Ecosolve 300 is a powerful solvent blend for difficult cleaning applications. It is safe with the majority of plastics, rubbers and elastomers, and will remove the white residues from PCB's. Ecosolve 300 evaporates quickly at a rate similar to CFC 111 and 113 solvent type materials leaving no residues. Applications include Flux removal from PCB's, magnetic head and electrical contact cleaning, and many other similar precision cleaning applications. Ecosolve 300 contains no CFC's or HFC's. Standard pack availability is 400ml Aerosols, 500ml and 1 litre trigger sprays, and 5 litre and 25 litre bulk containers.
Manufacturer: Surclean
Description

2. Composition and Information on Ingredients

Chemical Name

Concentration

R Phrases

Symbols

Isohexene

55 - 60 %

R36/R37

-

Propane

10 - 30 %

-

-

Isobutane (containing >0.1% butadiene)

10 - 30 %

-

-

3. Hazards Identification

- Extremely Flammable (R12)

- Odour: Slight Alcohol aroma.

- Appearance: Colourless liquid.

- Contact with eyes: Possible irritation to affected areas.

- Contact with skin: Prolonged skin contact will result in de-fatting of the skin, irritation and possible dermatitis

- Inhalation: In cases of severe exposure, drowsiness may develop.

- Ingestion: The ingestion of significant quantities may cause nausea

/vomiting. May cause drowsiness

4. First aid measures

Contact with skin

- Wash the affected area with plenty of soap and water.

- Afterwards a suitable moisturizing skin cream can be applied.

Contact with eyes

- If material has got into eyes, wash out immediately with plenty of water for at least 15 minutes.

- Seek medical attention if irritation persists.

Ingestion

- Do not induce vomiting.

- Seek medical attention.

Inhalation & General

- Remove the patient from the source of exposure to fresh air and lie down. Seek medical advice if necessary. If casualty is unconscious, place in recovery position.

5. Fire fighting measures

- Toxic fumes may be formed.

- In case of fire use foam, carbon dioxide or dry agent (S43).

- In the event of an adjacent fire, cool containers with water spray.

- Do not use water jets.

- Wear breathing apparatus.

6. Accidental release measures

Immediate actions

- Shut off all ignition sources.

Clean up procedures

- Ventilate area

- Absorb spillage in a suitable inert material.

- Place into an appropriate container.

Special precautions

- Do not allow material into public sewers or watercourses.

7. Handling & Storage

Handling

- Use only in well ventilated areas (S51)

Storage

- Pressurized container: Protect from sunlight and do not expose to temperatures exceeding 50 deg.C.

8. Exposure controls / personal protection

Engineering controls

- If practicable, engineering controls should be provided where airborne concentrations exceed exposure limit.

Precautionary measures

- Ensure adequate ventilation. Personal protection

- Wear goggles giving complete eye protection. Exposure limits

Isohexane

- OES / LTEL 500 ppm 1800 mg/m3

Isobutane (containing >0.1% butadiene)

- OES / LTEL 600 ppm 1450 mg/m3

- OES / STEL 750 ppm 1810 mg/m3

9. Physical & Chemical Properties

- Odour: Characteristic odour.

- Appearance: colourless liquid.

- Boiling point: > 50 deg.C.

- Vapour pressure: 200mm Hg at 20 deg.C.

- Vapour density: > 1 (air = 1)

- Insoluble in water.

- Density: 0.7 kg/m3

- Flash point: < 0 deg.C.

- Evaporation rate: < 1 (Butyl acetate = 1)

- Viscosity: Mobile at ambient temperatures.

10. Stability & Reactivity

- Stable.

- Keep away from heat and sources of ignition.

- Incompatible with oxidizing substances.

11. Toxicological information

- Low order of acute toxicity

12. Ecological information

12.1 Ecotoxicology: Not readily biodegradable.
12.2 Environmental Fate:- This substance is volatile.
- Low bioaccumulation potential.

13. Disposal consideration

- Dispose in accordance to local, state or government regulations.

- Do not pierce or burn containers, even after use.

14. Transport information

Proper Shipping Name: Aerosols, flammable, n.o.s.
UN
UN No:- : 1950
Road / Rail (ADR/RID)
ARD Hazard class : 2 ADR Item No. : 5°F
Sea (IMDG)
IMDG Hazard class : 2.1 IMDG Page No. : 2102
IMDG Ems : 2-13 IMDG MFAG
Air (ICAO/IATA)
ICAO Hazard class :2.1 ICAO Packing group

15. Regulatory information

Classification & labeling

- Indication of Danger: Flame symbol

- Classification: Extremely Flammable

Safety Phrases

- Keep out of the reach of children (S2).

- Keep away from all sources of ignition - No smoking (S16)

- Use only in well ventilated areas (S51)

16. Other Information

Use only as directed.
The information contained above has been complied from that provided by our suppliers and other sources. None of the original information relating to hazards or potential hazards has been omitted. Therefore the absence of a particular reference merely implies either that such information has not been determined or that it is not applicable to this particular product. Any amendments that may become necessary will be published and forwarded to users.
Surclean shall not be liable for any liability or loss of any nature (howsoever caused and whether or not due to negligence by Surclean), which may result from the use of this, or any other information provided in Surclean Technical literature. It is the customer’s sole responsibility to ascertain and test for the suitability, application and ultimate safety of any of our products and any information is provided on this basis only.

envelope

CONTACT US

Conro Electronics Ltd
Unit 7, Orbital 25, Dwight Road, Watford, Hertfordshire
WD18 9DA

delivery van icon

NEXT DAY DELIVERY

We offer next day and Saturday deliveries excluding orders made after 3pm weekdays, weekends and public holidays.


AS 9120B

Conro Electronics Ltd certified to the AS 9120B (Aerospace) standard

Click Here To View Our Certificate

ISO 9001:2015

Conro Electronics Ltd certified to ISO 9001:2015

Click Here To View Our Certificate