Phone Icon0208 953 1211       Email Iconinfo@conro.com

 x 
Cart empty

Surclean Isosolve (Pure IPA)

Surclean brand high quality 99.9% pure anhydrous Isopropanol for gentle precision cleaning and de-greasing. Evaporates completely leaving no residues. Compatible with Plastics and Rubber but tests should be made on susceptable painted surfaces. Can be used for moisture removal as the mixture (Azeatrope) of IPA and water will evaporate at a faster rate than water alone. Applications include Flux removal from PCB's, cleaning of magnetic pick up heads, optical components and switch contacts.
Manufacturer: Surclean
Description

Section 2. Composition and Information on Ingredients

Component CAS # % by

Weight

ISOPROPYL ALCOHOL 67-63-0 100

Section 3. Hazards Identification

Physical State and

Appearance Emergency Overview

Liquid. (Colorless.)
WARNING!
FLAMMABLE LIQUID AND VAPOR. VAPOR MAY CAUSE FLASH FIRE. HARMFUL IF INHALED OR SWALLOWED. CAUSES SEVERE EYE IRRITATION.
CAUSES DAMAGE TO THE FOLLOWING ORGANS: RESPIRATORY TRACT, SKIN, CENTRAL NERVOUS SYSTEM, EYE, LENS OR CORNEA.
MAY CAUSE SKIN IRRITATION.

Routes of Entry Absorbed through skin. Eye contact. Inhalation. Ingestion.

Potential Acute Health Effects

Eyes Extremely hazardous in case of eye contact (irritant). Inflammation of the eye

is characterized by redness, watering, and itching.

Skin May be hazardous in case of skin contact (irritant). Skin inflammation is

characterized by itching, scaling, reddening, or, occasionally, blistering. Non-permeator by skin.

Inhalation Hazardous in case of inhalation.

Ingestion Hazardous in case of ingestion.

Potential Chronic Health Effects

Carcinogenic This material is not known to cause cancer in animals or humans.

Effects

Medical Conditions Aggravated by Overexposure:

Additional information See Toxicological Information (section 11) Repeated exposure to a highly toxic material may produce general
deterioration of health by an accumulation in one or many human organs.

Section 4. First Aid Measures

Eye Contact Check for and remove any contact lenses. Immediately flush eyes with running

water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention immediately.

Skin Contact In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.

Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If

breathing is difficult, give oxygen. Get medical attention immediately.

Ingestion If swallowed, do not induce vomiting unless directed to do so by medical

personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.

Section 5. Fire Fighting Measures

Flammability of the

Product

Auto-ignition

Temperature

Product will burn.
399.05°C (750.3°F)

Flash Points OPEN CUP: 11.9°C (53.4°F).

Flammable Limits Not available.

Products of

Combustion Fire Hazards in Presence of Various Substances Explosion Hazards in Presence of Various Substances

These products are carbon oxides (CO, CO2).
Highly flammable in presence of open flames, sparks and static discharge, of shocks, of heat, of oxidizing materials.

Risks of explosion of the product in presence of static discharge: Highly flammable in presence of open flames, sparks and static discharge. Highly explosive in presence of open flames, sparks and static discharge.

Risks of explosion of the product in presence of mechanical impact:

Highly flammable in presence of shocks. Highly explosive in presence of shocks.

Fire Fighting Media Flammable liquid, soluble or dispersed in water.

and Instructions

Protective Clothing

(Fire)

Special Remarks on

Fire Hazards Special Remarks on Explosion Hazards

SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use alcohol foam, water spray or fog. Cool containing vessels with water jet in order to prevent pressure build-up, autoignition or explosion. Be sure to use an approved/certified respirator or equivalent.
Vapor may travel considerable distance to source of ignition and flash back. Not available.

Section 6. Accidental Release Measures

Small Spill and

Leak

Large Spill and

Leak

Spill Kit

Information

Dilute with water and mop up, or absorb with an inert dry material and place in
an appropriate waste disposal container.
Keep away from heat. Keep away from sources of ignition. Stop leak if
without risk. Absorb with DRY earth, sand or other non-combustible material. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal. Be careful that the product is
not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
The following EMD Chemicals Inc. SpillSolv (TM) absorbent is recommended
for this product: SX1330 Solvent Treatment Kit

Section 7. Handling and Storage

Handling Keep away from heat, sparks and flame. Keep container closed. Do not get in

eyes, on skin, or on clothing. Do not ingest. Do not breathe gas/fumes/
vapor/spray.

Storage Keep container in a cool, well-ventilated area.

Section 8. Exposure Controls/Personal Protection

Engineering

Controls

Personal Protection

Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.

Eyes Splash goggles.

Body Lab coat.

Respiratory Vapor respirator. Be sure to use an approved/certified respirator or equivalent.

Wear appropriate respirator when ventilation is inadequate.

Hands Gloves.

Feet Not applicable.

Personal Protection

in Case of a Large

Spill

Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self-contained
breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.

Product Name Exposure Limits

ISOPROPYL ALCOHOL EH40-OES (United Kingdom (UK), 1997).
STEL: 1250 mg/m3
STEL: 500 ppm
MEL: 999 mg/m3
MEL: 400 ppm

ACGIH (United States, 1994).

STEL: 1230 mg/m3
STEL: 500 ppm
TWA: 983 mg/m3
TWA: 400 ppm

NIOSH REL (United States, 1994).

STEL: 1225 mg/m3
STEL: 500 ppm
TWA: 980 mg/m3 Period: 10 hour(s). TWA: 400 ppm Period: 10 hour(s).

OSHA Final Rule (United States, 1989).

STEL: 1225 mg/m3
STEL: 500 ppm
TWA: 980 mg/m3
TWA: 400 ppm

Section 9. Physical and Chemical Properties

Odor Characteristic.

Color Colorless.

Physical State and

Appearance

Liquid. (Colorless.)

Molecular Weight 60.11 g/mole

Molecular Formula C3-H8-O

pH Not available.

Boiling/Condensation 82.55°C (180.6°F)

Point

Melting/Freezing

Point

-88.83°C (-127.9°F)
Specific Gravity 0.785 (Water = 1) Vapor Pressure Not available. Vapor Density 2.07 (Air = 1) Odor Threshold Not available.

Evaporation Rate 1.7 compared to (n-BUTYL ACETATE=1)

LogKow Not available.

Solubility Soluble in water.

Section 10. Stability and Reactivity

Stability and

Reactivity Conditions of Instability Incompatibility with Various Substances

The product is stable.
Not available.
Highly reactive with oxidizing agents.

Rem/Incompatibility Not available.

Hazardous

Decomposition Products Hazardous Polymerization

Not available.
Will not occur.

Section 11. Toxicological Information

iso-Propyl Alcohol NT8050000

RTECS Number:

Toxicity Acute oral toxicity (LD50): 3600 mg/kg [Mouse].

Acute dermal toxicity (LD50): 12800 mg/kg [Rabbit].

Chronic Effects on

Humans

Acute Effects on

Humans

Synergetic Products (Toxicologically)

Not available.
Extremely hazardous in case of eye contact (irritant). Inflammation of the eye
is characterized by redness, watering, and itching. May be hazardous in case of skin contact (irritant). Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering. Non-permeator by skin. Hazardous in case of inhalation. Hazardous in case of ingestion.
Not available.

Irritancy Draize Test ( Rabbit):

Eyes: 100 mg/24h. Reaction: Moderate.

Sensitization Not available.

Carcinogenic

Effects Toxicity to Reproductive System

This material is not known to cause cancer in animals or humans.
Tests on laboratory animals for reproductive effects are cited in Registry of
Toxic Effects on Chemical Substances (RTECS).

Teratogenic Effects Not available.

Mutagenic Effects Tests on laboratory animals for mutagenic effects are cited in Registry of

Toxic Effects of Chemical Substances (RTECS).

Section 12. Ecological Information Ecotoxicity Not available. BOD5 and COD Not available.

Toxicity of the

Products of

Biodegradation

The products of degradation are less toxic than the product itself.

Section 13. Disposal Considerations

EPA Waste Number D001

Treatment Incineration, fuels blending or recycle. Contact your local permitted waste

disposal site (TSD) for permissible treatment sites. Always contact a permitted waste disposal (TSD) to assure compliance with all current local, state, and Federal Regulations.

Section 14. Transport Information

DOT Classification Not available.

TDG Classification Not available.

IMO/IMDG

Classification ICAO/IATA Classification

Not available.
Not available.

Section 15. Regulatory Information

U.S. Federal

Regulations

TSCA 4(a) final test rules: ISOPROPYL ALCOHOL
TSCA 8(b) inventory: ISOPROPYL ALCOHOL
TSCA 8(d) H and S data reporting: ISOPROPYL ALCOHOL: 1986
TSCA 12(b) one time export: ISOPROPYL ALCOHOL
SARA 302/304/311/312 extremely hazardous substances: No products were
found.
SARA 302/304 emergency planning and notification: No products were found. SARA 302/304/311/312 hazardous chemicals: ISOPROPYL ALCOHOL
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: ISOPROPYL ALCOHOL: Fire Hazard, Immediate (Acute) Health Hazard, Delayed (Chronic) Health Hazard
SARA 313 toxic chemical notification and release reporting: ISOPROPYL
ALCOHOL
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean air act (CAA) 112 accidental release prevention: No products were
found.
Clean air act (CAA) 112 regulated flammable substances: No products were
found.
Clean air act (CAA) 112 regulated toxic substances: No products were found.

WHMIS (Canada) CLASS B-2: Flammable liquid with a flash point lower than 37.8°C (100°F).

Class D-2B: Material causing other toxic effects (TOXIC). CEPA DSL: ISOPROPYL ALCOHOL

International

Regulations

EINECS ISOPROPYL ALCOHOL 200-661-7

DSCL (EEC) R11- Highly flammable.

R36/37- Irritating to eyes and respiratory system.

International

Lists

Australia (NICNAS): ISOPROPYL ALCOHOL
Japan (MITI): ISOPROPYL ALCOHOL Japan (MOL): ISOPROPYL ALCOHOL Korea (TCCL): ISOPROPYL ALCOHOL
Philippines (RA6969): ISOPROPYL ALCOHOL China: No products were found.

State Regulations Pennsylvania RTK: ISOPROPYL ALCOHOL: (environmental hazard, generic

environmental hazard)
Massachusetts RTK: ISOPROPYL ALCOHOL New Jersey: ISOPROPYL ALCOHOL California prop. 65: No products were found.

Section 16. Other Information

National Fire

Protection Association

(U.S.A.)

Health 3 Fire Hazard

1 0 Reactivity

Specific Hazard

Changed Since Last +

Revision

Notice to Reader

The statements contained herein are based upon technical data that Surclean Materials believes to be reliable, are offered for information purposes only and as a guide to the appropriate precautionary and emergency handling of the material by a properly trained person having the necessary technical skills. Users should consider these data only as a supplement to other information gathered by them and must make independent determinations of suitability and completeness of information from all sources to assure proper use, storage and disposal of these materials and the safety and health of employees and customers and the protection of the environment. Surclean MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, WITH RESPECT TO THE INFORMATION HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.

envelope

CONTACT US

Conro Electronics Ltd
Unit 7, Orbital 25, Dwight Road, Watford, Hertfordshire
WD18 9DA

delivery van icon

NEXT DAY DELIVERY

We offer next day and Saturday deliveries excluding orders made after 3pm weekdays, weekends and public holidays.


AS 9120B

Conro Electronics Ltd certified to the AS 9120B (Aerospace) standard

Click Here To View Our Certificate

ISO 9001:2015

Conro Electronics Ltd certified to ISO 9001:2015

Click Here To View Our Certificate