Humiseal Acrylics

Exclusive UK Partner

Delivery

Next day delivery on in stock items ordered before 4.30pm

Product Description

  • Humiseal 1B12 Acrylic

    HumiSeal® 1B12 is a single component, fast drying, low viscosity, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B12 is particularly well suited for impregnating coil, for coating ferrite cores and can be soldered through easily or chemically removed. HumiSeal® 1B12 coating is RoHS Directive 2002/95/EC compliant.

    • Part Number
      • 1 Litre Can: 51312
      • 5 Litre Can: 51423
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM D1475 0.89 ± 0.02 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 21.5 ± 1.5 %
Viscosity, per Fed-Std-141, Meth. 4287 30 ± 5 centipoise
VOC 714 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 10 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 30 min @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Thinner (dipping & brushing) HumiSeal® Thinner 503
Thinner (spraying) HumiSeal® Thinner 521
Recommended Stripper HumiSeal® Stripper 1080
Shelf Life at Room Temperature, DOM 18 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 56 ppm/°C
Glass Transition Temperature – DSC 32°C
Modulus – DMA 67.4 MPa
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.8
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 2.5 x 1014 ohms (250TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 3.0 x 1010 ohms (30GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Description

  • Humiseal 1B18 Acrylic

    HumiSeal® 1B18 is a single component, fast drying, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B18 demonstrates excellent flexibility and electrical properties, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B18 coating is RoHS Directive 2002/95/EC compliant, and recognized under UL File Number E105698.

    • Part Number
      • 1 Litre Can: 51514
      • 5 Litre Can: 51779
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM 0.92 ± 0.02 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 30 ± 2 %
Viscosity, per Fed-Std-141, Meth. 4287 250 ± 20 centipoise
VOC 645 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 30 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 2 hrs @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Thinner (dipping & brushing) HumiSeal® Thinner 503, 505 Recommended
Thinner (spraying) HumiSeal® Thinner 73
Recommended Stripper HumiSeal® Stripper 1080
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 67 ppm/°C
Glass Transition Temperature – DSC 42°C
Modulus – DMA 11.1 MPa Flammability, per UL 94 V-0
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 6300 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.6
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)
Fungus Resistance, per ASTM G21 Passes

Product Description

  • Humiseal 1B31 Acrylic

    HumiSeal® 1B31 is a fast drying, single component, acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1B31 demonstrates excellent flexibility, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B31 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2002/95/EC compliant.

    • Part Number
      • 1 Litre Can: 51525
      • 5 Litre Can: 51313
      • 400ml Aerosol: 51507
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM D1475 0.91 ± 0.02 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 35 ± 3 %
Viscosity, per Fed-Std-141, Meth. 4287 200 ± 15 centipoise
VOC 592 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 10 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 30 min @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Thinner (dipping & brushing) HumiSeal® Thinner 503
Thinner (spraying) HumiSeal® Thinner 521, 521EU
Recommended Stripper HumiSeal® Stripper 1080, 1080EU
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 170 ppm/°C below Tg | 340 ppm/°C above Tg
Glass Transition Temperature – DSC 14°C
Modulus – DMA 2000 MPa @ -40°C 1050 MPa @ 20°C 8.5 MPa @ 60°C
Flammability, per MIL-I-46058C Self-Extinguishing
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 7500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 6.0 x 1010 ohms (60GΩ)
Fungus Resistance, per ASTM G21 Passes

Product Description

  • Humiseal 1B31EPA Acrylic

    HumiSeal® 1B73EPA is a fast drying, single component, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B73EPA demonstrates excellent flexibility, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B73EPA coating is MIL-I-46058C qualified, IPC-CC-830, RoHS Directive 2011/65/EU and EPA 33/50 compliant, and recognized under UL File Number E105698.

    • Part Number
      • 1 Litre Can: 51412
      • 5 Litre Can: 51435
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM D1475 0.96 ± 0.03 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 23 ± 3 %
Viscosity, per Fed-Std-141, Meth. 4287 230 ± 30 centipoise
VOC 739 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 30 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 60 min @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Thinner HumiSeal® Thinner 600
Recommended Stripper HumiSeal® Stripper 1080, 1080A
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 67 ppm/°C
Glass Transition Temperature – DSC 42°C
Modulus – DMA 11.1 MPa
Flammability, per UL 94 V-0
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 6300 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.6
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)
Fungus Resistance, per ASTM G21 Passes

Product Description

  • Humiseal 1B31S Acrylic

    HumiSeal® 1B31S is a fast drying, single component, acrylic conformal coating that provides improved adhesion, excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1B31S demonstrates outstanding flexibility, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B31S coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2002/95/EC compliant.

    • Part Number
      • 1 Litre Can: 51468
      • 5 Litre Can: 51478
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM

D1475

0.91 ± 0.02 g/cm3

Solids Content, % by weight per Fed-Std-141, Meth. 4044

35 ± 3 %

Viscosity, per Fed-Std-141, Meth. 4287

200 ± 15 centipoise

VOC

592 grams/litre

Drying Time to Handle per Fed-Std-141, Meth. 4061 10 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 30 min @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Thinner (dipping & brushing) HumiSeal® Thinner 503
Thinner (spraying) HumiSeal® Thinner 521
Recommended Stripper HumiSeal® Stripper 1080
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 170 ppm/°C below Tg | 340 ppm/°C above Tg
Glass Transition Temperature – DSC 14°C
Modulus – DMA 2000 MPa @ -40°C 1050 MPa @ 20°C 8.5 MPa @ 60°C

Flammability, per MIL-I-46058C

Self-Extinguishing

Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 7500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 6.0 x 1010 ohms (60GΩ)
Fungus Resistance, per ASTM G21 Passes

Product Description

  • 1B51NSLU Acrylic SYNTHETIC RUBBER

    HumiSeal® 1B51NSLU is a fast drying, single component, synthetic rubber conformal coating that contains methylcyclohexane solvent that is more environmentally friendly than traditional solvents. Because of its unique base polymer, HumiSeal® 1B51NSLU has extremely low moisture vapor permeability. The coating demonstrates excellent flexibility, low stress on components, fluoresces under UV for ease of inspection and is easily repaired. HumiSeal® 1B51NSLU is in full compliance with the RoHS Directive 2002/95/EC.

    • Part Number
      • 1 Litre Can: 51528
      • 5 Litre Can: 51530
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM

D1475

0.81 ± 0.02 g/cm³

Solids Content, % by weight per Fed-Std-141, Meth. 4044

22 ± 2 %

Viscosity, per Fed-Std-141, Meth. 4287

185 ± 30 centipoise

VOC

632 grams/litre

Drying Time to Handle per Fed-Std-141, Meth. 4061 10 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 30 min @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Thinner HumiSeal® Thinner 903, 905, 521EU
Recommended Stripper HumiSeal® Stripper 1080, 1080EU
Shelf Life at Room Temperature, DOM 18 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 55 ppm/°C
Glass Transition Temperature – DSC 14°C
Modulus – DMA 93.1 MPa @ -20°C
73.5 MPa @ 0°C
35.3 MPa @ 20°C

Moisture Vapour Transmission, per ASTM E398-03

<1 g/m2•day•mil

Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 4900 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.07
Insulation Resistance, per MIL-I-46058C 2.0 x 1014 ohms (200TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 1.0 x 1010 ohms (10GΩ)
Fungus Resistance, per ASTM G21 Passes

Product Description

  • Humiseal 1B73 Acrylic

    HumiSeal® 1B73 is a single component, fast drying, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B73 demonstrates excellent flexibility and electrical properties, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B73 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant, and recognized under UL File Number E105698.

    • Part Number
      • 1 Litre Can: 51486
      • 5 Litre Can: 51489
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM D1475

0.92 ± 0.02 g/cm3

Solids Content, % by weight per Fed-Std-141, Meth. 4044

29.5 ± 2 %

Viscosity, per Fed-Std-141, Meth. 4287

250 ± 20 centipoise

VOC

661 grams/litre

Drying Time to Handle per Fed-Std-141, Meth. 4061 30 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions

24hrs@RT or 2hrs@76°C

Time Required to Reach Optimum Properties 7 days
Recommended Thinner HumiSeal® Thinner 73
Recommended Stripper HumiSeal® Stripper 1080, 1080A
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 67 ppm/°C
Glass Transition Temperature – DSC 42°C
Modulus – DMA 11.1 MPa
Flammability, per UL 94 V-0
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 6300 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.6
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.010
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Description

  • Humiseal 1B73 LED PB 25 Acrylic

    HumiSeal® 1B73 LED PB 25 CPS is a single component, fast drying, acrylic conformal coating intended for use on LED/signage printed circuit assemblies. HumiSeal® 1B73 LED PB 25 CPS is characterized by a higher degree of optical clarity and greater resistance to damage by sunlight than standard conformal coatings. HumiSeal® 1B73 LED PB 25 CPS demonstrates excellent flexibility and electrical properties. HumiSeal® 1B73 LED PB 25 CPS coating is RoHS Directive 2011/65/EU compliant.

    • Part Number
      • 1 Litre Can: 55160
      • 5 Litre Can: 55162
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM

D1475

0.90 ± 0.02 g/cm³

Solids Content, % by weight per Fed-Std-141, Meth. 4044

16 ± 1 %

Viscosity, per Fed-Std-141, Meth. 4287

25 ± 5 centipoise

VOC

661 grams/litre

Drying Time to Handle per Fed-Std-141, Meth. 4061 30 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 2 hrs @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Stripper HumiSeal® Stripper 1080
Shelf Life at Room Temperature, DOM 12 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 67 ppm/°C
Glass Transition Temperature – DSC 42°C
Modulus – DMA 11.1 MPa
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 6300 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.6
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.010
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)
Fungus Resistance, per ASTM G21 Passes

Product Description

  • Humiseal 1B73EPA Acrylic

    HumiSeal® 1B73EPA is a fast drying, single component, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B73EPA demonstrates excellent flexibility, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B73EPA coating is MIL-I-46058C qualified, IPC-CC-830, RoHS Directive 2011/65/EU and EPA 33/50 compliant, and recognized under UL File Number E105698.

    • Part Number
      • 1 Litre Can: 51496
      • 5 Litre Can: 51498
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM D1475

0.92 ± 0.03 g/cm3

Solids Content, % by weight per Fed-Std-141, Meth. 4044

23 ± 3 %

Viscosity, per Fed-Std-141, Meth. 4287

230 ± 30 centipoise

VOC

739 grams/litre

Drying Time to Handle per Fed-Std-141, Meth. 4061 30 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions

24hrs@RT or 60 min. @76°C

Time Required to Reach Optimum Properties 7 days
Recommended Thinner HumiSeal® Thinner 600
Recommended Stripper HumiSeal® Stripper 1080, 1080A
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 67 ppm/°C
Glass Transition Temperature – DSC 42°C
Modulus – DMA 11.1 MPa
Flammability, per UL 94 V-0
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 6300 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.6
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Description

  • Humiseal 1R32 Acrylic

    HumiSeal® 1R32A-2 is a fast drying, single component acrylic coating, formulated for improved adhesion to typical substrates while providing excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1R32A-2 fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1R32A-2 is in full compliance with IPC-CC-830 and the RoHS Directive 2002/95/EC, and E105698.

    • Part Number
      • 1 Litre Can: 55175
      • 5 Litre Can: 51500
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density, per ASTM D1475 0.91 ± 0.02 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 D1475 0.91 ± 0.02 g/cm³
Viscosity, per Fed-Std-141, Meth. 4287 220 ± 30 centipoise
VOC 645 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 10 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 30 min @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Thinner (dipping & brushing) HumiSeal® Thinner 503, 505 Recommended
Thinner (spraying) HumiSeal® Thinner 521, 521EU, 600
Recommended Stripper HumiSeal® Stripper 1080, 1080EU
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 170 ppm/°C below Tg | 340 ppm/°C above Tg
Glass Transition Temperature – DSC 14°C
Modulus – DMA 2000 MPa @ -40°C 1050 MPa @ 20°C 8.5 MPa @ 60°C Flammability, per UL 94 V-0
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 7500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 6.0 x 1010 ohms (60GΩ)
Fungus Resistance, per ASTM G21 Passes