LOCTITE ABLESTIK 24 Epoxy Adhesive - Part A / B Kit

LOCTITE ABLESTIK 24 is recommended for joining transparent materials, such as glass, and where a thin bond line is desired.

+ More Details

From £401.43 Excl VAT £481.72 incl VAT

LOCTITE ABLESTIK 24 is recommended for joining transparent materials, such as glass, and where a thin bond line is desired.

+ More Details

Datasheets Properties Video DELIVERY

Product Information

This adhesive can withstand continuous exposure at temperatures as high as 90ºC and short term exposures up to 120ºC.

Two component
Low viscosity
Room temperature cure
Easy mixing

DIRECTIONS FOR USE

1. Complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt and oils which can cause poor adhesion or corrosion in a bonded part.2. Clean up solvent is alcohol, acetone, or methyl ethyl ketone (MEK).3. Vapor de-greasing is satisfactory.4. Roughening of the surfaces will improve bond strength.5. Accurately weigh resin and hardener into a clean container in the recommended ratio. Weighing apparatus having an accuracy in proportion to the amounts being weighed should be used.6. In small quantities, a 4:1 ratio by weight or 3:1 ratio by volume is acceptable.7. Mix thoroughly.8. Coat both surfaces to be joined with as thin a layer of adhesive as possible and join together.9. In most applications only contact pressure is required

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.