Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Colour
Clear
Brand
Loctite
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Loctite EA 9455 SDS
Revision
Version SDS
Download
Manuals
Loctite EA 9455 TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Loctite EA 9455 Epoxy Adhesive

Tap to expand
Tap to expand
Loctite EA 9455 Epoxy Adhesive
Loctite EA 9455 Epoxy Adhesive
From £18.92 Excl VAT £22.70 incl VAT
-
+
Loctite EA 9455 is a clear, 2-part, high strength, low viscosity epoxy adhesive. It is a fast curing product, using mercaptan as a hardener.

Product Information

Loctite EA 9455 is a 2-part, high strength, low viscosity epoxy adhesive. The product is colourless, fast curing and uses mercaptan as a hardener. It is suitable for use on plastics, metals, glass, wood, ceramics and rubbers. Loctite EA 9455 is an excellent electrical insulator and provides good peel resistance.Loctite EA 9455 cures at room temperature after mixing. It develops full strength within 3 to 6 hours. High temperatures can accelerate the curing process. Typical applications for this product include bonding and potting of optical components like sensors and lenses.
  • Toughened, high strength epoxy adhesive
  • Low viscosity
  • 2-part product, requiring mixing prior to application
  • Very clear adhesive bondline
  • Low shrinkage properties
  • Provides excellent electrical insulation
 

How to use Loctite EA 9455:

  1. For best results, clean all surfaces with a Loctite solvent. Use Loctite SF 7063.
  2. Blend resin and hardener before use. Loctite EA 9455 can be applied directly from dual cartridges. Dispense through the mixer head supplied. Discard the first 3 to 5 cm of bead dispensed.
  3. If using bulk containers, mix thoroughly in the proportions specified in the Product Description Matrix. For hand mixing, weigh or measure out the desired amount of resin and hardener and mix thoroughly.
  4. Apply the adhesive to one surface to be bonded. For maximum strength, apply evenly to both surfaces. Apply as quickly as possible and assemble parts immediately.
  5. Don't move the assembled parts during cure. Allow bond to develop full strength before subjecting to any service loads. This will usually take 3 to 6 hours.
 

Storage

Store Loctite EA 9455 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Conro PN: CEL005519
7 In StockAdditional stock available on 19 February 2025, if ordered today
£17.74 Excl VAT
-
+
Stock available on 19 February 2025, if ordered today
From £19.76 Excl VAT
Stock available on 19 February 2025, if ordered today
From £18.92 Excl VAT
Conro PN: CEL001756
1 In StockAdditional stock available on 07 April 2025, if ordered today
£24.75 Excl VAT
-
+

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre