Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Brand
Loctite
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Loctite 406 SDS
Revision
Version SDS
Download
Manuals
Loctite 406 TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Loctite 406 Instant Adhesive

Tap to expand
Tap to expand
Loctite 406 Instant Adhesive
Loctite 406 Instant Adhesive
From £21.67 Excl VAT £26.00 incl VAT
-
+
LOCTITE 406 is a low viscosity, 1-part, fast curing cyanoacrylate adhesive. It is designed for the bonding of plastics and elastomeric materials.

Product Information

This product can also be used on difficult-to-bond plastics, in combination with LOCTITE primers for cyanoacrylates. LOCTITE 406 has exceptionally low viscosity. Full adhesive strength is developed in a very short time. However, curing continues for at least 24 hours, before full chemical resistance is developed. Width of the bondline gap and ambient humidity both affect curing speed.
  • Rapid bonding of plastic and rubber, including EPDM
  • Speed: attaches components in seconds
  • high strength
  • Exceptionally low viscosity

How to use Loctite 406:

  1. Clean surfaces before applying the product.
  2. To improve bonding on low energy plastic surfaces, LOCTITE 770 primer may be applied. Allow the primer to dry.
  3. LOCTITE activator may be used if necessary. Apply it to one bond surface. Do not apply activator to a primed surface. Allow the activator to dry.
  4. Apply LOCTITE 406 to one of the bond surfaces. Do not apply on the activated surface. Do not spread the adhesive with a tissue or brush.
  5. Assemble components carefully. The short fixture time leaves little opportunity for adjustment.
  6. Hold together or clamp bonds until the adhesive has fixtured.
  7. Allow product to develop full strength before subjecting to any service loads. This will usually take between 24 and 72 hours.

Storage

Store LOCTITE 406 in the unopened container in a dry location. Optimal Storage: 2° C to 8° C. Storage below 2° C or greater than 8° C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Conro PN: CEL005725
Stock available on 17 December 2024, if ordered today
£20.39 Excl VAT
-
+
Stock available on 17 December 2024, if ordered today
From £59.04 Excl VAT
Stock available on 17 December 2024, if ordered today
From £26.72 Excl VAT
Stock available on 17 December 2024, if ordered today
From £57.47 Excl VAT

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre