- Home
- Adhesives
- Instant Adhesives
- Loctite 480 Instant Adhesive
Loctite 480 Instant Adhesive
Product Information
- High resistance to shock
- High tensile and shear strength
- Rapidly bonds magnets, metal and rubber
- Works reliably in humid environments
How to use Loctite 480:
- Clean surfaces before applying the product.
- LOCTITE 480 performs best in thin bond gaps (0.05 mm). Increasing the bond gap will slow down the rate of cure.
- To improve bonding on low energy plastic surfaces, LOCTITE 770 primer may be applied. Allow the primer to dry.
- LOCTITE activator may be used if necessary. Apply it to one bond surface. Do not apply activator to a primed surface. Allow the activator to dry.
- Apply adhesive to one of the bond surfaces. Do not apply on the activated surface. Do not spread the adhesive with a tissue or brush.
- Assemble components carefully. The short fixture time leaves little opportunity for adjustment.
- Allow product to develop full strength before subjecting to any service loads. This will usually take between 24 and 72 hours.
Storage
Store LOCTITE 480 in the unopened container in a dry location. Optimal Storage: 2° C to 8° C. Storage below 2° C or greater than 8° C can adversely affect product properties.Material removed from containers may be contaminated during use. Do not return product to the original container.Delivery Information
FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).
International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.
Please refer to our World Wide Delivery page for more information including countries served and delivery options.
Video
No video available.
Similar Products
You May Be Interested In
Recently Viewed
There are no recently viewed products.