Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Brand
Loctite
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Loctite 603 1l SDS
Revision
Version SDS
Download
Manuals
Loctite 603 SDS
Revision
Version SDS
Download
Manuals
Loctite 603 TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Loctite 603 Retaining Compound

Tap to expand
Tap to expand
Loctite 603 Retaining Compound
Loctite 603 Retaining Compound
From £9.65 Excl VAT £11.58 incl VAT
-
+
LOCTITE 603 is a high strength retaining compound designed for the bonding of cylindrical fitting parts. The product is especially suited for surfaces that are not consistently clean.

Product Information

LOCTITE 603 is a high strength retaining compound. It is designed for the bonding of cylindrical fitting parts. The product is especially suited for surfaces that are not consistently clean. LOCTITE 603 is highly resistant to oils.LOCTITE 603 cures when confined between close-fitting metal surfaces. The curing process occurs in the absence of air. The product prevents loosening and leakage due to shock and vibration. Typical applications include retention of roller bearings or oil impregnated bushes into housings.
  • Low viscosity
  • High strength
  • Especially suited for sintered bearings
  • High oil tolerance

How to use Loctite 603:

  1. For best results, clean surfaces with a LOCTITE solvent. Allow it to dry.
  2. If using on inactive metal or curing speed is too slow, use an activator spray such as LOCTITE SF 7471 or SF 7649. Allow it to dry.
  3. For slip fitted assemblies. Apply adhesive around the leading edge of the pin and the inside of the collar. Use a rotating motion during assembly to ensure good coverage.
  4. For press fitted assemblies. Apply adhesive thoroughly to both bond surfaces. Assemble at high press on rates.
  5. For shrink fitted assemblies. Apply adhesive onto the pin. Heat collar to create sufficient clearance for free assembly.
  6. Allow LOCTITE 603 to develop full strength before subjecting to any service loads. This will usually take about 24 hours.

Storage

Store LOCTITE 603 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

Similar Products

Conro PN: CEL005219
Stock available on 18 December 2024, if ordered today
£193.39 Excl VAT
-
+
Conro PN: CEL005239
Stock available on 18 December 2024, if ordered today
£199.08 Excl VAT
-
+
Conro PN: CEL005230
Stock available on 18 December 2024, if ordered today
£182.56 Excl VAT
-
+
Stock available on 18 December 2024, if ordered today
From £42.27 Excl VAT

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre