- Home
- Adhesives
- Retaining Compounds
- Loctite 603 High Strength Low Viscosity Oil Tolerant - 10ML Bottle
Loctite 603 Retaining Compound
Product Information
- Low viscosity
- High strength
- Especially suited for sintered bearings
- High oil tolerance
How to use Loctite 603:
- For best results, clean surfaces with a LOCTITE solvent. Allow it to dry.
- If using on inactive metal or curing speed is too slow, use an activator spray such as LOCTITE SF 7471 or SF 7649. Allow it to dry.
- For slip fitted assemblies. Apply adhesive around the leading edge of the pin and the inside of the collar. Use a rotating motion during assembly to ensure good coverage.
- For press fitted assemblies. Apply adhesive thoroughly to both bond surfaces. Assemble at high press on rates.
- For shrink fitted assemblies. Apply adhesive onto the pin. Heat collar to create sufficient clearance for free assembly.
- Allow LOCTITE 603 to develop full strength before subjecting to any service loads. This will usually take about 24 hours.
Storage
Store LOCTITE 603 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.Delivery Information
FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).
International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.
Please refer to our World Wide Delivery page for more information including countries served and delivery options.
Video
Similar Products
You May Be Interested In
Recently Viewed
There are no recently viewed products.