Plastics tend to have smooth surfaces and many common glues don’t adhere well to them. To adhere plastic, the first thing you need to know is what type of plastic are you using.
Spread solder paste on the pads of the circuit board. Apply heat on the joints with a soldering iron. The paste will melt and, after cooling, the solder will form a solid bond.
It is essential to remove flux residues after soldering. Flux residue can be cleaned with an isopropyl alcohol (IPA) solution.
After extensive testing, Humiseal will be adding more products to the new 5 litre multi-layer co-extruded polymer container.
A soldering iron is the main tool used in the process of soldering. Finding a good one is a matter of choosing the right one for your needs.
Blue Loctite is the name used for a medium strength thread locker manufactured by Henkel Loctite. The most common type is Loctite 243. It is used to seal and lock metal fasteners.
Soldering Flux is a chemical cleaning agent used in the soldering process. Its purpose is to prepare surfaces for soldering by removing any oxides and impurities.
Opposed to lead solder, the higher melting point and different composition of lead-free solders have several side effects. Manufacturers often need to adjust to the peculiarities of lead-free mixes.
Isopropyl alcohol is a great circuit board cleaner because it is cheap, widely available and evaporates quickly. Compared to other cleaners, alcohol contains fewer chemicals.
Further to Humiseals product change notification in June 2021 for change of packaging to a new polymer container.