Ambersil Industrial Degreaser FG

Ambersil Industrial Degreaser FG is a general purpose solvent degreaser, specially formulated for use in the food and drink industry. It is a heavy-duty product, made to tackle difficult degreasing applications. Its formula is based on a mix of solvents that make it ideal where rapid turnaround is necessary and low flash point solvents can be used. Ambersil Industrial Degreaser FG quickly dissolves greases, oils, lubricants, adhesives and other contaminants. It can be used on motors, bearings, brakes, pumps, dies, generators and other machinery and metal parts.

Ambersil Industrial Degreaser FG is a NSF registered product, authorized for use in food processing and packaging equipment. It contains no chlorinated solvents. It has a fast evaporation rate to minimise downtime, leaves no residue and does not stain. The product is safe on most plastics, but testing before use is recommended.

• Effectively removes grease, lubricant, oil and other contaminants
• Food processing safe
• Colourless and odourless
• Effective on equipment, machinery, motors and metal parts
• 360° spray system for all angle use

How to use Ambersil Industrial Degreaser FG:

1. Ambersil Industrial Degreaser FG can be used by spraying, immersion, dipping or wiping.
2. Liberally apply product to the surface to be cleaned and allow excess to run off.
3. Air dry or dry with absorbent cloth.
4. Repeat application if necessary.

Storage

Store Ambersil Industrial Degreaser FG in the unopened container at room temperature. In any case, store under 50°C and away from direct heat and open flame. Shelf life of the product is no less than 6 years if properly stored. This product is categorised as FLAMMABLE and must be stored in compliance with relevant regulations.