Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Brand
Humiseal
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Humiseal 1B31S SDS
Revision
Version SDS
Download
Manuals
Humiseal 1B31S TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Humiseal 1B31S Acrylic Conformal Coating

Tap to expand
Tap to expand
Humiseal 1B31S Acrylic Conformal Coating
Humiseal 1B31S Acrylic Conformal Coating
From £58.18 Excl VAT £69.82 incl VAT
-
+
HumiSeal 1B31S is a fast drying, single component, acrylic conformal coating that provides improved adhesion, excellent moisture and environmental protection for printed circuit assemblies.

Product Information

HumiSeal 1B31S demonstrates outstanding flexibility, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal 1B31S coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2002/95/EC compliant.

HumiSeal 1B31S conformal coating is:

  • an acrylic chemistry
  • fast drying
  • single component

HumiSeal 1B31S conformal coating has:

  • excellent moisture and environmental protection for printed circuit assemblies
  • improved adhesion to difficult substrates
  • fluorescence under UV light for ease of inspection
  • reworkability with ease
  • MIL-I-46058C qualification
  • IPC-CC-830 compliance
  • RoHS directive 2015/863/EU

Application of 1B31S Conformal Coating

Conformal coatings can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials. Users should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level. Please contact a HumiSeal representative for additional information.

Dipping

Depending on the complexity, density and configuration of components on the assembly, it may be necessary to reduce the viscosity of HumiSeal 1B31S with HumiSeal Thinner 503 in order to obtain a uniform film. Once optimum viscosity is determined, a controlled rate of immersion and withdrawal (typically, 5 to 15 cm/min) will further ensure even deposition of the coating and provide a uniform film. During application, evaporation of solvent causes an increase in viscosity that should be adjusted by adding small amounts of HumiSeal Thinner 503. Viscosity in the dip tank should be checked regularly using a simple measuring device, such as a Zahn or Ford viscosity cup.

Spraying

HumiSeal 1B31S can be sprayed using conventional spraying equipment. Spraying should be done in an environment with adequate ventilation so that vapor and mist are carried away from the operator. The addition of HumiSeal Thinner 521 or 521EU is necessary to ensure a uniform spray pattern resulting in a pinhole-free film. The amount of thinner and spray pressure will depend on the specific type of spray equipment and operator technique. The recommended ratio of HumiSeal 1B31S to HumiSeal Thinner 521or 521EU is 1:1 by volume; however, the ratio may need to be adjusted to obtain a uniform coating.

Brushing

HumiSeal 1B31S may be brushed with a small addition of HumiSeal Thinner 503. Uniformity of the film depends on the component density and operator technique.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Conro PN: CEL008924
Stock available on 13 November 2024, if ordered today
£252.47 Excl VAT
-
+
Conro PN: CEL003539
1 In StockAdditional stock available on 01 November 2024, if ordered today
£132.19 Excl VAT
-
+
Conro PN: CEL007093
Stock available on 13 November 2024, if ordered today
£587.11 Excl VAT
-
+
Conro PN: CEL001774
1 In StockAdditional stock available on 28 October 2024, if ordered today
£623.68 Excl VAT
-
+
Conro PN: CEL005898
Stock available on 28 October 2024, if ordered today
£568.01 Excl VAT
-
+

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre