Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Size
400ML
Brand
Humiseal
MPN
70661
Commodity Code
32082090
Country Of Origin
India
Categorisation
Limited Quantity Dangerous Goods
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Humiseal 1A27 Aerosol SDS
Revision
Version SDS
Download
Manuals
Humiseal 1A27 Aerosol TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Humiseal 1A27 Polyurethane - 400ML Aerosol

Conro PN: CEL001492
MPN: 70661
Tap to expand
Tap to expand
Humiseal 1A27 Polyurethane  - 400ML Aerosol
Humiseal 1A27 Polyurethane  - 400ML Aerosol
6 In StockAdditional stock available on 18 October 2024, if ordered today
£28.49 Excl VAT £34.19 incl VAT
Price Breaks
0 - 23
£28.49 Excl. VAT
24 +
£23.76 Excl. VAT
-
+
HumiSeal 1A27 Aerosol is a fast drying, clear urethane conformal coating intended for use on printed circuit assemblies.

Product Information

The product is conveniently dispensed from aerosol cans, utilizing an environmentally safe, non- ODP propellant. The coating may be removed chemically using HumiSeal Stripper 1063. HumiSeal 1A27 Aerosol is IPC-CC-830 and RoHS Directive 2002/95/EC compliant, and recognized under UL File Number E105698.

HumiSeal 1A27 conformal coating is:

  • Urethane chemistry
  • chemically resistant
  • single component
  • contains no free isocyanates
  • RoHS directive 2015/863/EU
  • recognized under UL File Number E105698.

HumiSeal 1A27 conformal coating has:

  • excellent moisture and environmental protection for printed circuit assemblies
  • RoHS Directive 2002/95/EC compliance

Application of HumiSeal 1A27 Aerosol:

  1. Allow 48 hours minimum to reach room temperature before using cans stored or received during cold weather.
  2. When applied in conditions of high ambient humidity, blushing (cloudy white film) may appear.  Heating the coated assembly in an oven for 1/2 hour at 76°C eliminates this condition.
  3. Surface must be cleaned of dirt, wax, grease, flux residues and all similar contaminants for successful application of the coating.
  4. Mask areas not requiring coating from overspray using suitable non-silicone masking methods or materials.
  5. Shake can vigorously before using and repeat frequently during use.
  6. Best results are obtained by spraying from a distance of 30 – 40 cm in light even coats.   A film thickness of 25 – 75 microns is sufficient to provide protection.
  7. To clean nozzle after use, hold can upside down, then press nozzle for a few seconds.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Conro PN: CEL001235
57 In StockAdditional stock available on 18 October 2024, if ordered today
£33.51 Excl VAT
-
+
Conro PN: CEL001164
106 In StockAdditional stock available on 03 November 2024, if ordered today
£29.61 Excl VAT
-
+

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre