Humiseal 1080EU Stripper for Conformal Coating combines material innovation with application versatility to meet industry needs. Experience humiseal 1080EU Stripper removes acrylic, silicone, and urethane coatings from PCBs, ensuring fast, safe, and residue-free rework. Order now to experience quality and reliability. HumiSeal Stripper 1080EU contains no ozone depleting chemicals and meets North American air quality regulations. HumiSeal Stripper 1080 is in full compliance with the RoHS Directive 2002/95/EC.
HumiSeal Stripper 1080EU is:
compatible with all HumiSeal acrylic coatings.
compliant with RoHS directive 2015/863/EU
safe for use on printed circuit board assemblies.
Stripper 1080EU has:
no ozone depleting chemicals
Directions for Use
immerse the assembly into HumiSeal Stripper 1080
soak for 30-60 minutes
brush loose material from the assembly
clean the assembly with IPA, DI water or other qualified cleaning solution
inspect the assembly to ensure the coating has been completely removed
repeat the steps above if the coating is still on the assembly
bake for a minimum of 30 minutes at 60–65°C after the final cleaning process.
The use of heat is not required for use with HumiSeal Stripper 1080. A fully cured acrylic coating of nominal thickness will typically dissolve readily within 30 to 60 minutes upon contact with HumiSeal Stripper 1080. It is important to thoroughly clean the assembly after the conformal coating removal process. Following the cleaning process, The assembly should be baked to remove residual moisture for a minimum of 30 minutes at 60–65°C. This product is widely adopted in sectors such as aerospace, defense, electronics, and industrial manufacturing.
배송 정보
100.00 이상 주문 시 영국 본토 무료 배송(사무실을 통한 주문은 배송료가 부과됩니다.).
전 세계 100개 이상의 국가로국제 배송이 가능합니다. 배송비는 상품의 무게, 위치 및 위험성에 따라 자동으로 계산됩니다. 고객이 원하는 경우 전작을 선택하여 자신만의 컬렉션을 구성할 수도 있습니다.
