Loctite Cleaning

LOCTITE® SF 7031 is a clear, colourless, solvent-based cleaning treatment for all surfaces to be bonded with LOCTITE® cyanoacrylate adhesives. It neutralises surfaces which might inhibit the cure speed of the adhesive. LOCTITE SF 7031 is applied after other treatments. Typical applications include cleaning of plated parts, surfaces contaminated with release agents and parts soiled by handling.

LOCTITE® SF 7039 is a contact spray cleaner formulated for use on electrical contacts exposed to moisture or other contaminants, without damaging existing varnishes. It leaves a water repellant residue and is typically used in applications with an operating temperature range of -30 °C to +50 °C.

LOCTITE® SF 7061 is a non-CFC solvent-based formulation for cleaning and degreasing surfaces to be bonded with LOCTITE adhesives. The product is used as a final pre-assembly cleaning treatment to remove most greases, oils, lubrication fluids, metal cuttings and fines from surfaces to be bonded. Its high solvent power allows it to be very effective in other degreasing or part-cleaning applications.

LOCTITE® SF 7063 is our general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job involving LOCTITE adhesives. It is a solvent-based cleaner and the product leaves no residue. LOCTITE SF 7063 removes most greases, oils, lubrication fluids and metal cuttings.

LOCTITE® SF 7064 is a colourless, clear, methylal and ethanol free cleaner used for cleaning and degreasing surfaces to be bonded with LOCTITE adhesives. It can also be used for cleaning and degreasing machine components during maintenance operations.

LOCTITE® SF 7070 is a solvent-based (non-CFC) parts cleaner and degreaser formulated specifically to prepare plastic components ready for bonding with adhesives. Suitable for use as a spray or in immersion cleaning at room temperature, the product is able to remove most oils, greases, lubrication fluids, metal cuttings and fines from plastic parts without the risk of stress cracks.

LOCTITE® SF 7200 is designed to remove cured chemical gaskets by softening the material on the flanges. Once applied, the product develops a foam-like layer on the gasket, preventing the agent from running off the desired location. It therefore keeps working for the required duration. Typical applications include removal of all types of chemical gaskets from metal flanges. It is particularly suitable for aluminium or other soft metal flanges where scraping could lead to surface damage.

LOCTITE® SF 7840 is a concentrated, biodegradable cleaner that contains no hazardous solvents and dilutes with water to serve a wide range of industrial cleaning applications. Typical applications for this product include engines, motors, castings, valves, bearings, tanks, machinery, windows, carpets, and concrete floors. The product can remove grease, lubricants, cutting oils, fuel oils, tar, road salt, light carbon, food stains, wax, animal fat, mildew, and soot.

LOCTITE® 7010™ is a universal cleaner for machines and all surfaces in work shops, storerooms and social rooms (floors, walls, fixtures out of concrete, plastics, ceramics). LOCTITE® 7010™ has a fresh scent and is manually applied by sponge, cloth or mop. This product is biodegradable and solvent-free.

LOCTITE® SF 7012™ is a multi purpose cleaner for cleaning soils, grease, oil and all kind of dirt. It can be used for cleaning of all substrates like metals, rubbers and painted surfaces. LOCTITE® SF 7012™ provides good foaming properties. The product is suitable for ultrasonic dip tanks high pressure spray and foam generation. Can be used in spray, brush or manual applications.