Loctite Electronic Kits

Exclusive UK Partner

Delivery

Next day delivery on in stock items ordered before 4.30pm

 

Product Description

  • Loctite Output Kit (315 x 25ml and 7386 x 18ml)

    LOCTITE® 315/LOCTITE SF 7386 KIT is a kit consisting of 2 parts, LOCTITE 315, a self-shimming thermally conductive adhesive for bonding electrical components to heat sinks with an insulating gap and LOCTITE SF 7386, an activator which cures LOCTITE adhesives. The kit is used to bond transformers, transistors and other heat generating electronic components to printed circuit boards. To view Technical Information for these products, please go to the pages for LOCTITE 315 and LOCTITE SF 7386.

Product Specification

Technology
Acrylic
Chemical Type Modified acrylic
Appearance (uncured) Blue paste LMS
Components One component –
requires no mixing
Viscosity High
Cure Activator
Application Bonding

Product Description

  • Loctite Tak Pak Kit (382 x 20g and 7455 x 25ml)

    LOCTITE® 382 / LOCTITE® SF 7455 is a kit consisting of a colourless, high viscosity ethyl cyanoacrylate adhesive, LOCTITE 382, formulated for electronics applications and an amine cyanoacrylate activator, LOCTITE SF 7455, based on n-heptane. They are used with TAK PAK accelerators (e.g. for tacking wire to coil forms, tamper proofing adjustable components, etc.). Please note: To view Technical Information for these products, please go to the pages for LOCTITE® 382 and LOCTITE® SF 7455.

Product Specification

Technology
Solvent based
Chemical Type Pigmented organic polymer
Appearance Red liquid
Cure Solvent evaporation
Application Visible marker for use on electronics
equipment

Product Description

  • Loctite 5145 Tempflex Kit 40ml

    OCTITE® SI 5145 is a translucent, non-slumping, room temperature-vulcanising liquid alkoxy silicone adhesive and sealant specifically formulated for bonding, sealing and coating electronic devices in military, automotive and industrial electronics. It resists weathering, moisture, ozone and retains its properties through severe environments. It is used in applications up to +200 °C.

Product Specification

Technology
Silicone
Chemical Type Alkoxy silicone
Appearance (uncured) Translucent liquid LMS
Components One component –
requires no mixing
Cure Visible marker for use on electronics
equipment
Application Bonding, Sealing or Coating
Specific Benefit Non-corrosive
Flexibility Enhances load bearing & shock absorbing characteristics of the bond area.
Strength High

Product Description

  • Loctite SF 7400 Varnistop Kit 20ml

    LOCTITE® SF 7400 is a dark-red, solvent-based marking ink for use on electronic equipment. It is ideal for tamper-proofing adjustment points or marking components to indicate they have been set or tested. The product dries quickly and has excellent adhesion to a range of substrates. It has a service temperature range of -35 to +145°C and is available in a 20 ml pack size.

Product Specification

Technology
Solvent based
Chemical Type Pigmented organic polymer
Appearance Red liquid
Cure Solvent evaporation
Application Visible marker for use on electronics equipment