Humiseal Pre Blends

Exclusive UK Partner

Delivery

Next day delivery on in stock items ordered before 4.30pm

 

Product Description

  • Humiseal 1A33 PB100

    HumiSeal® 1A33 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. HumiSeal® 1A33 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal® 1A33, and its Pre-blend Products, contain no free isocyanates and fluoresce under UV light for inspection purposes. HumiSeal® 1A33 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant and recognized under UL File Number E105698.

Product Specification

Recommended Coating Thickness

0.91 ± 0.02 g/cm3

Drying Time to Handle per Fed-Std-141, Meth. 4061

35 ± 3 %

Optional Curing Conditions to Reach Optimum Properties

200 ± 15 centipoise

Recommended Stripper

592 grams/litre

Thermal Shock, 50 cycles per MIL-I-46058C 10 minutes
Coefficient of Thermal Expansion – TMA 25 – 75 microns
Glass Transition Temperature – DSC 24 hrs @ RT or 30 min @ 76°C
Modulus – DMA 7 days
Flammability, per UL 94 HumiSeal® Thinner 503
Dielectric Withstand Voltage, per MIL-I-46058C HumiSeal® Thinner 521
Dielectric Breakdown Voltage, per ASTM D149 HumiSeal® Stripper 1080
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 24 months
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 -65°C to 125°C
Insulation Resistance, per MIL-I-46058C 175 ppm/°C below Tg | 345 ppm/°C above Tg
Moisture Insulation Resistance, per MIL-I-46058C 14°C
CTI, PLC per UL746E @ 600 volts 850 MPa @ 40°C
Fungus Resistance, per ASTM G21 >1500 volts

 

Product Viscosity
(cPs)
Solids
(%)
Density
(g/cm3)
VOC
(g/L)
Shelf Life
(months)
1A33/600/AP2 22.5 ± 5 30 ± 3 0.945 ± 0.025 661.5 12
1A33 PB 23 CPS 23 ± 5 34 ± 1 0.92 ± 0.02 607.2 12
1A33 PB 48.3 CPS 48.3 ± 5 38 ± 1 0.93 ± 0.02 576.6 12
1A33 PB 55 CPS 55 ± 5 39 ± 1.5 0.93 ± 0.03 567.3 12
1A33 PB 64 CPS 64 ± 5 39 ± 2 0.94 ± 0.02 573.4 24
1A33 PB 80 CPS 80 ± 5 40 ± 2 0.94 ± 0.02 564.0 24
1A33 PB 100 CPS 100 ± 5 41 ± 2 0.94 ± 0.02 554.6 24

Product Description

  • Humiseal 1A33/521 PB23 CPS

    HumiSeal® 1A33/521 PB25 is a single component polyurethane conformal coating that has been formulated for use in automated spray equipment without requiring additional thinning. HumiSeal® 1A33/521 PB25 demonstrates excellent flexibility, fluoresces under UV light for ease of inspection and is easily repaired.

Product Specification

Density, per ASTM D1475 0.93 ± 0.02 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 36 ± 1 %
Viscosity, per Fed-Std-141, Meth. 4287 25 ± 3 centipoise
VOC 569 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 15 minutes
Recommended Coating Thickness 25 – 75 microns
Optional Curing Conditions to Reach Optimum Properties 30 days at RT
30 hours @ 76°C
20 hours @ 88°C
Recommended Stripper HumiSeal® Stripper 1063
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 193 ppm/°C
Glass Transition Temperature – DSC 26°C
Modulus – DMA 27.2 MPa
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 7500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 3.6
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.03
Insulation Resistance, per MIL-I-46058C 2.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 1.6 x 1010 ohms (16GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Description

  • Humiseal 1A33/521 PB64 CPS

    HumiSeal® 1A33/521 PB25 is a single component polyurethane conformal coating that has been formulated for use in automated spray equipment without requiring additional thinning. HumiSeal® 1A33/521 PB25 demonstrates excellent flexibility, fluoresces under UV light for ease of inspection and is easily repaired.

Product Specification

Density, per ASTM D1475 0.93 ± 0.02 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 40 ± 2 %
Viscosity, per Fed-Std-141, Meth. 4287 65 ± 5 centipoise
VOC 559 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 15 minutes
Recommended Coating Thickness 25 – 75 microns
Optional Curing Conditions to Reach Optimum Properties 30 days at RT
30 hours @ 76°C
20 hours @ 88°C
Recommended Stripper HumiSeal® Stripper 1063
Shelf Life at Room Temperature, DOM 24 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 193 ppm/°C
Glass Transition Temperature – DSC 26°C
Modulus – DMA 27.2 MPa
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 7500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 3.6
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.03
Insulation Resistance, per MIL-I-46058C 2.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 1.6 x 1010 ohms (16GΩ)
CTI, per UL746E @ 600 volts 0 PLC
Fungus Resistance, per ASTM G21 Passes

 

Product Description

  • Humiseal 1A33 PB80

    HumiSeal® 1A33 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. HumiSeal® 1A33 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal® 1A33, and its Pre-blend Products, contain no free isocyanates and fluoresce under UV light for inspection purposes. HumiSeal® 1A33 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant and recognized under UL File Number E105698.

Product Specification

Recommended Coating Thickness

0.91 ± 0.02 g/cm3

Drying Time to Handle per Fed-Std-141, Meth. 4061

35 ± 3 %

Optional Curing Conditions to Reach Optimum Properties

200 ± 15 centipoise

Recommended Stripper

592 grams/litre

Thermal Shock, 50 cycles per MIL-I-46058C 10 minutes
Coefficient of Thermal Expansion – TMA 25 – 75 microns
Glass Transition Temperature – DSC 24 hrs @ RT or 30 min @ 76°C
Modulus – DMA 7 days
Flammability, per UL 94 HumiSeal® Thinner 503
Dielectric Withstand Voltage, per MIL-I-46058C HumiSeal® Thinner 521
Dielectric Breakdown Voltage, per ASTM D149 HumiSeal® Stripper 1080
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 24 months
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 -65°C to 125°C
Insulation Resistance, per MIL-I-46058C 175 ppm/°C below Tg | 345 ppm/°C above Tg
Moisture Insulation Resistance, per MIL-I-46058C 14°C
CTI, PLC per UL746E @ 600 volts 850 MPa @ 40°C
Fungus Resistance, per ASTM G21 >1500 volts

 

Product Viscosity
(cPs)
Solids
(%)
Density
(g/cm3)
VOC
(g/L)
Shelf Life
(months)
1A33/600/AP2 22.5 ± 5 30 ± 3 0.945 ± 0.025 661.5 12
1A33 PB 23 CPS 23 ± 5 34 ± 1 0.92 ± 0.02 607.2 12
1A33 PB 48.3 CPS 48.3 ± 5 38 ± 1 0.93 ± 0.02 576.6 12
1A33 PB 55 CPS 55 ± 5 39 ± 1.5 0.93 ± 0.03 567.3 12
1A33 PB 64 CPS 64 ± 5 39 ± 2 0.94 ± 0.02 573.4 24
1A33 PB 80 CPS 80 ± 5 40 ± 2 0.94 ± 0.02 564.0 24
1A33 PB 100 CPS 100 ± 5 41 ± 2 0.94 ± 0.02 554.6 24

Product Description

  • Humiseal 1A33/521 PB48

    HumiSeal® 1A33 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. HumiSeal® 1A33 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal® 1A33, and its Pre-blend Products, contain no free isocyanates and fluoresce under UV light for inspection purposes. HumiSeal® 1A33 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant and recognized under UL File Number E105698.

Product Specification

Recommended Coating Thickness

0.91 ± 0.02 g/cm3

Drying Time to Handle per Fed-Std-141, Meth. 4061

35 ± 3 %

Optional Curing Conditions to Reach Optimum Properties

200 ± 15 centipoise

Recommended Stripper

592 grams/litre

Thermal Shock, 50 cycles per MIL-I-46058C 10 minutes
Coefficient of Thermal Expansion – TMA 25 – 75 microns
Glass Transition Temperature – DSC 24 hrs @ RT or 30 min @ 76°C
Modulus – DMA 7 days
Flammability, per UL 94 HumiSeal® Thinner 503
Dielectric Withstand Voltage, per MIL-I-46058C HumiSeal® Thinner 521
Dielectric Breakdown Voltage, per ASTM D149 HumiSeal® Stripper 1080
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 24 months
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 -65°C to 125°C
Insulation Resistance, per MIL-I-46058C 175 ppm/°C below Tg | 345 ppm/°C above Tg
Moisture Insulation Resistance, per MIL-I-46058C 14°C
CTI, PLC per UL746E @ 600 volts 850 MPa @ 40°C
Fungus Resistance, per ASTM G21 >1500 volts

 

Product Viscosity
(cPs)
Solids
(%)
Density
(g/cm3)
VOC
(g/L)
Shelf Life
(months)
1A33/600/AP2 22.5 ± 5 30 ± 3 0.945 ± 0.025 661.5 12
1A33 PB 23 CPS 23 ± 5 34 ± 1 0.92 ± 0.02 607.2 12
1A33 PB 48.3 CPS 48.3 ± 5 38 ± 1 0.93 ± 0.02 576.6 12
1A33 PB 55 CPS 55 ± 5 39 ± 1.5 0.93 ± 0.03 567.3 12
1A33 PB 64 CPS 64 ± 5 39 ± 2 0.94 ± 0.02 573.4 24
1A33 PB 80 CPS 80 ± 5 40 ± 2 0.94 ± 0.02 564.0 24
1A33 PB 100 CPS 100 ± 5 41 ± 2 0.94 ± 0.02 554.6 24

Product Description

  • Humiseal 1B31/521 PB23 CPS

    HumiSeal® 1B31 is a fast drying, single component, acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1B31 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal® 1B31, and its Pre-blends, demonstrate excellent flexibility, fluoresce under UV light for ease of inspection and are easily repairable. HumiSeal® 1B31 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant. After complete cure, the properties of HumiSeal® 1B31 Pre-Blends and HumiSeal® 1B31 are comparable.

Product Specification

Recommended Coating Thickness

25 – 75 microns

Drying Time to Handle per Fed-Std-141, Meth. 4061

10 minutes

Recommended Curing Conditions

24 hrs @ RT or 30 min @ 76°C

Time Required to Reach Optimum Properties

7 days

Recommended Stripper HumiSeal® Stripper 1080
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 170 ppm/°C below Tg
340 ppm/°C above Tg
Glass Transition Temperature – DSC 14°C
Modulus – DMA 2000 MPa @ -40°C
1050 MPa @ 20°C
8.5 MPa @ 60°C
Flammability, per MIL-I-46058C Self-Extinguishing
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 7500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 6.0 x 1010 ohms (60GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Viscosity
(cPs)
Solids
(%)
Density
(g/cm3)
VOC
(g/L)
Shelf Life
(months)
1B31 PB 18 CPS 18 ± 5 15 ± 1.5 0.89 ± 0.02 747.6 12
1B31 PB 23 CPS 23 ± 5 16 ± 1.5 0.89 ± 0.02 743.2 12
1B31 PB 65 CPS 65 ± 5 24 ± 1 0.90 ± 0.02 685.8 24
1B31/505 PB 49 CPS 49 ± 5 24.5 ± 1 0.88 ± 0.02 664.4 12
1B31-245 40 ± 5 22 ± 2 0.86 ± 0.02 654.0 12
1B31/503 PB 110 CPS 110 ± 5 29 ± 2 0.90 ± 0.01 639.0 12

Product Description

  • Humiseal 1B31/521 PB65 CPS

    HumiSeal® 1B31 is a fast drying, single component, acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1B31 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal® 1B31, and its Pre-blends, demonstrate excellent flexibility, fluoresce under UV light for ease of inspection and are easily repairable. HumiSeal® 1B31 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant. After complete cure, the properties of HumiSeal® 1B31 Pre-Blends and HumiSeal® 1B31 are comparable.

Product Specification

Recommended Coating Thickness

25 – 75 microns

Drying Time to Handle per Fed-Std-141, Meth. 4061

10 minutes

Recommended Curing Conditions

24 hrs @ RT or 30 min @ 76°C

Time Required to Reach Optimum Properties

7 days

Recommended Stripper HumiSeal® Stripper 1080
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 170 ppm/°C below Tg
340 ppm/°C above Tg
Glass Transition Temperature – DSC 14°C
Modulus – DMA 2000 MPa @ -40°C
1050 MPa @ 20°C
8.5 MPa @ 60°C
Flammability, per MIL-I-46058C Self-Extinguishing
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 7500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 6.0 x 1010 ohms (60GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Viscosity
(cPs)
Solids
(%)
Density
(g/cm3)
VOC
(g/L)
Shelf Life
(months)
1B31 PB 18 CPS 18 ± 5 15 ± 1.5 0.89 ± 0.02 747.6 12
1B31 PB 23 CPS 23 ± 5 16 ± 1.5 0.89 ± 0.02 743.2 12
1B31 PB 65 CPS 65 ± 5 24 ± 1 0.90 ± 0.02 685.8 24
1B31/505 PB 49 CPS 49 ± 5 24.5 ± 1 0.88 ± 0.02 664.4 12
1B31-245 40 ± 5 22 ± 2 0.86 ± 0.02 654.0 12
1B31/503 PB 110 CPS 110 ± 5 29 ± 2 0.90 ± 0.01 639.0 12

Product Description

  • Humiseal 1B51NSLU 521 EU PB60

    HumiSeal® 1B51NSLU/521EU PB60 is a fast drying, single component, synthetic rubber conformal coating that contains methylcyclohexane solvent that is more environmentally friendly than traditional solvents. The coating demonstrates excellent flexibility, low stress on components, fluoresces under UV for ease of inspection and is easily repaired. HumiSeal® 1B51NSLU/521EU PB60 is sold as a ready-to-spray preblended product and requires no further dilution. HumiSeal® 1B51NSLU/521EU PB60 is in full compliance with the RoHS Directive 2002/95/EC.

Product Specification

Density, per ASTM D1475 0.81 ± 0.02 g/cm³
Solids Content, % by weight per Fed-Std-141, Meth. 4044 15 ± 2 %
Viscosity, per Fed-Std-141, Meth. 4287 60 ± 5 centipoise
VOC 691 grams/litre
Drying Time to Handle per Fed-Std-141, Meth. 4061 10 minutes
Recommended Coating Thickness 25 – 75 microns
Recommended Curing Conditions 24 hrs @ RT or 30 min @ 76°C
Time Required to Reach Optimum Properties 7 days
Recommended Stripper HumiSeal® Stripper 1080
Shelf Life at Room Temperature, DOM 12 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 55 ppm/°C
Glass Transition Temperature – DSC 14°C
Modulus – DMA 93.1 MPa @ -20°C
73.5 MPa @ 0°C
35.3 MPa @ 20°C
Moisture Vapor Transmission, per ASTM E398-03 <1 g/m2•day•mil
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 4900 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.07
Insulation Resistance, per MIL-I-46058C 2.0 x 1014 ohms (200TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 1.0 x 1010 ohms (10GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Description

  • Humiseal 1B73/521 PB23 CPS

    HumiSeal® 1B73 is a single component, fast drying, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B73 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal® 1B73, and its Pre-blends, demonstrate excellent flexibility and electrical properties, fluoresce under UV light for ease of inspection and are easily repairable. HumiSeal® 1B73 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant, and recognized under UL File Number E105698. After complete cure, the properties of HumiSeal® 1B73 Pre-blends and HumiSeal® 1B73 are comparable.

Product Specification

Recommended Coating Thickness

25 – 75 microns

Drying Time to Handle per Fed-Std-141, Meth. 4061

30 minutes

Recommended Curing Conditions

24 hrs @ RT or 2 hrs @ 76°C

Time Required to Reach Optimum Properties

7 days

Recommended Stripper HumiSeal® Stripper 1080
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 67 ppm/°C
Glass Transition Temperature – DSC 42°C
Modulus – DMA 11.1 MPa
Flammability, per UL 94 V-0
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 6300 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.6
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.010
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Viscosity
(cPs)
Solids
(%)
Density
(g/cm3)
VOC
(g/L)
Shelf Life
(months)
1B73 PB 23 CPS 23 ± 5 15 ± 1 0.90 ± 0.02 765.0 12
1B73 PB 38 CPS 38 ± 5 19.5 ± 1.5 0.91 ± 0.03 728.0 12
1B73 PB 55 CPS 55 ± 5 21 ± 1.5 0.91 ± 0.03 718.9 12
1B73 PB 65 CPS 65 ± 5 22 ± 2 0.91 ± 0.02 713.7 18
1B73/73 PB 25CPS 25 ± 5 15.5 ± 1 0.91 ± 0.02 769.0 12

Product Description

  • Humiseal 1B73/521 PB65 CPS

    HumiSeal® 1B73 is a single component, fast drying, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B73 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal® 1B73, and its Pre-blends, demonstrate excellent flexibility and electrical properties, fluoresce under UV light for ease of inspection and are easily repairable. HumiSeal® 1B73 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant, and recognized under UL File Number E105698. After complete cure, the properties of HumiSeal® 1B73 Pre-blends and HumiSeal® 1B73 are comparable.

Product Specification

Recommended Coating Thickness

25 – 75 microns

Drying Time to Handle per Fed-Std-141, Meth. 4061

30 minutes

Recommended Curing Conditions

24 hrs @ RT or 2 hrs @ 76°C

Time Required to Reach Optimum Properties

7 days

Recommended Stripper HumiSeal® Stripper 1080
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Coefficient of Thermal Expansion – TMA 67 ppm/°C
Glass Transition Temperature – DSC 42°C
Modulus – DMA 11.1 MPa
Flammability, per UL 94 V-0
Dielectric Withstand Voltage, per MIL-I-46058C >1500 volts
Dielectric Breakdown Voltage, per ASTM D149 6300 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.6
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.010
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)
Fungus Resistance, per ASTM G21 Passes

 

Product Viscosity
(cPs)
Solids
(%)
Density
(g/cm3)
VOC
(g/L)
Shelf Life
(months)
1B73 PB 23 CPS 23 ± 5 15 ± 1 0.90 ± 0.02 765.0 12
1B73 PB 38 CPS 38 ± 5 19.5 ± 1.5 0.91 ± 0.03 728.0 12
1B73 PB 55 CPS 55 ± 5 21 ± 1.5 0.91 ± 0.03 718.9 12
1B73 PB 65 CPS 65 ± 5 22 ± 2 0.91 ± 0.02 713.7 18
1B73/73 PB 25CPS 25 ± 5 15.5 ± 1 0.91 ± 0.02 769.0 12