HumiSeal Acrylic Gel has been designed for use with our acrylic conformal coatings. HumiSeal Acrylic Gel can be used for sealing, damming and to provide an extra level of protection around component leads. HumiSeal Acrylic Gel fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal Acrylic Gel is in full compliance with the RoHS Directive 2002/95/EC.
- fluoresces under UV light for ease of inspection
- is easily repaired
- is fully compliant with the RoHS directive 2015/863/EU
- provides excellent moisture and environmental protection
- can be used to seal, dam and provide an extra level of protection around component leads
HumiSeal Acrylic Gel is:
- a fast drying
- single component
- thixotropic acrylic paste
Syringe Application:
HumiSeal Acrylic Gel is intended for automated needle dispensing, but may also be applied manually.
Application of HumiSeal Acrylic Gel:
Cleanliness of the substrate is of extreme importance for the successful application of a Acrylic Gel. Surfaces must be free of moisture, dirt, wax, grease, and all other contaminants. Otherwise, ionic or organic residues on the substrate could be trapped under Acrylic Gel and cause problems with adhesion or electrical properties. The highest long term reliability for a coated printed circuit assembly will be when Acrylic Gel is applied over a clean, dry substrate.
The application of Acrylic Gel over no clean flux is a common practice. The user should perform adequate testing to confirm compatibility between Acrylic Gel and their particular assembly materials and process conditions.
Kujtim Iljazi –
Do you have a more extended datasheet for the electric breakdown protety of the gerl and if it compatible with coating on top with acrylat