Loctite UVALOC 1000 UV Cure Chamber

The chamber has four rack levels to accommodate a slide-in tray that allows for easy positioning of parts of various heights at the level of optimum exposure. A perforated aluminium plate allows the positioning of customized part holders. The lamp is shielded by a timed control shutter that eliminates UV exposure to operators during the loading or unloading of parts. A door safety switch prevents opening while exposure is in progress. The cure time is controlled by the built-in timer and can be operated in a continuous or timed mode. The exposure cycle is triggered by the footswitch, panel-mount start button, or PLC interface.

• Lamp intensity is continually monitored.
• Low-level output condition can be established to ensure optimal curing performance and notification for lamp replacement.
• Typical UV irradiance is up to 110 mW/cm2 depending upon the selection of 4-position rack height.
• A dual power setting of 500 or 1000 watts permits the curing of temperature-sensitive parts without damage by heat.
• Effective cure area of 6.3 inches wide by 6.3 inches deep (160 mm x 160 mm).
• The digital timer allows for setting exposure time from 3 seconds to 15 minutes in one-second increments.
• Pneumatically operated shutter prevents exposure of UV to operators.
• The safety door interlock switch prevents the opening of the door while the shutter is open.
• Built-in over-temp protection in the controls automatically shuts the lamp off in a high temp condition.
• Parabolic shaped reflector generates a uniformly illuminated radiation area.
• The standard lamp included is a mercury vapor lamp; 365 nm wavelength.
• 1,000 hours of expected UV bulb life with proper handling and maintenance.