Metcal MFR-1350 Desolder System
Part number: MFR-1350£591.00 ex.VAT (£709.20 inc.VAT)
MFR-1350 – MFR Dual Port Desolder System, Internal Pump.
Available to order. Your estimated delivery is: 14/04/2023
Free shipping on orders over £75
Same day dispatch if you place your order before 3.30pm
Manufacturer CofC available at checkout
The MFR-1300 Series Desoldering and Rework Systems are standalone equipment. The power supply features an internal pump providing 0.7 bar pressure and 60 watts of SmartHeat-Technology that makes through-hole desoldering easy and keeps your products safe from board damage. The new handpiece has been designed to be used in two configurations. As standard, the MFR-H5-DS desolder tool is a pencil grip design and a clip-on grip enables the handpiece to be used in a pistol style. The Solder collection chamber has a large capacity and the innovative replaceable tips enables reduced downtime and quicker changeover. Since the system has two switchable ports it can be used in addition with a soldering tip, cartridge or tweezers handpiece.
Features
- SmartHeat Technology provides exceptional power for high thermal demand applications
- Single or Dual simultaneous outputs allow for single/dual hand-piece use
- Five hand-pieces available for increased application solutions for soldering
- Desoldering (upgrade kit MX-UK5) and rework on one system
- Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility
- Ergonomic handpieces for operator safety and comfort
| Input Line Voltage: | 100 - 240 VAC, grounded circuit, 50/60 Hz |
| Rated Power Consumption: | 110 W max. |
| Output Power: | Variable, 60 W max.* |
| Output Frequency: | 450 KHz |
| Heating Method: | Induction, smartHeatR |
| Connections: | Switchable Dual Port |
| Power Supply Dim. W x D x H: | 170 x 200 x 152.5 mm (6.7"" x 7.9"" x 6"") |
| Power Supply Weight: | 3.9 kg (8.6 lb) |
| Certification / Marking: | cTUVus, CE |
| Tip-to- Ground Potential: | < 2 mV |
| Tip-to-Ground Resistance: | < 2 Ohm |
| Ground Detection: | Permanent |
| Surface Resistivity: | 105 - 109 Ohm |
| Idle Temperature Stability: | 1.1 °C ( 2 °F) in still air |
| Tip Temperature Accuracy: | Meets or exceeds IPC J-STD-001 Standard |
| Vacuum Suction Force: | 0.7 bar (21"" Hg at Vacuum pump) |
| Noise Level: | < 55 dB |
| Power Cord Length: | 183 cm, 18/3 SJT |
| Warranty: | 1 year |
| Ambient Operating Temp: | 10 - 40 °C (50 - 104 °F) |
| Max. Enclosure Temp: | 55 °C (131 °F) |
| Desolder-Pen Specificaton | MFR-H5-DS |
| Hand-Piece Cable Length: | 152 cm (60”), burn proof, ESD-safe |
| Hand-piece - Connector: | 8-pin circular DIN |
| Air Hose: | ESD-save |
-
Metcal-MFR-1300-Data-Sheet.pdf
Size: 0.98 MB
Type: pdf
| Weight | 6.75 kg |
|---|---|
| Dimensions | 0.018 × 0.0025 × 0.0015 cm |
| MPN | MFR-1350 |
Delivery info
Shipment method | Shipment cost |
Click and Collect | FREE |
Next day (orders above £75.00 ex.vat) | FREE |
Next day (orders below £75.00 ex.vat) | £6.99 |
Next day pre 12AM | £17.99 |
Next day pre 10AM | £20.99 |
Saturday AM | £45.00 |
Be the first to review “Metcal MFR-1350 Desolder System”
Related products
Reviews
There are no reviews yet.