Humiseal Solvent Free

Exclusive UK Partner

Delivery

Next day delivery on in stock items ordered before 4.30pm

 

Product Description

  • Humiseal UV40-250

    HumiSeal® UV40-250 is a single component, high solids, UV curable, acrylated polyurethane conformal coating that possesses excellent chemical resistance, surface hardness, flexibility and moisture resistance. The material is tackfree after exposure to UV light. A secondary moisture cure mechanism will cure unexposed areas of the coating within 2-3 days at ambient conditions. The coating fluoresces under UV light to allow for coating inspection and can be applied by all selective coating equipment. HumiSeal® UV40-250 is recognized under UL File Number E105698 and is IPC-CC-830 and RoHS Directive 2011/65/EC compliant.

    • Part Number
      • 1 Litre Can: 51448
      • 5 Litre Can: 51450
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density 1.06 g/cm3
Minimum Solids Content

95 %

Viscosity, per Fed-Std-141, Meth. 4287 300 ± 50 centipoise
Recommended Coating Thickness 25 – 125 microns
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 6 months
Recommended Stripper** HumiSeal® Stripper 1100
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Glass Transition Temperature – DSC 26°C
Coefficient of Thermal Expansion 112 ppm/°C Below Tg
283 ppm/°C Above Tg
Modulus – DMA 1060 MPa -60°C
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.41
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)
Fungus Resistance, per ASTM G21 Pass
Resistance to Chemicals Excellent

Product Description

  • Humiseal UV40

    HumiSeal® UV40 is a single component, high solids, UV curable, acrylated polyurethane conformal coating that possesses excellent chemical resistance, surface hardness, flexibility and moisture resistance. The material is tackfree after exposure to UV light. A secondary moisture cure mechanism will cure unexposed areas of the coating within 2-3 days at ambient conditions. The coating fluoresces under UV light to allow for coating inspection and can be applied by selective coating equipment. HumiSeal® UV40 coating is recognized under UL File Number E105698, and is MIL-I-46058C qualified, and IPC-CC-830 and RoHS Directive 2011/65/EC compliant.

    • Part Number
      • 1 Litre Can: 51454
      • 5 Litre Can: 51456
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density 1.10 ± 0.05 g/cm3
Minimum Solids Content

95 %

Viscosity, per Fed-Std-141, Meth. 4287 650 ± 150 centipoise
Recommended Coating Thickness 25 – 125 microns
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Recommended Stripper** HumiSeal® Stripper 1100
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Glass Transition Temperature – DSC 45°C
Coefficient of Thermal Expansion – TMA 85 ppm/°C Below Tg
197 ppm/°C Above Tg
Modulus – DMA 10360 MPa @ -40ºC
4280 MPa @ 25ºC
66 MPa @ 80ºC
Flammability, per UL-94 V-0
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dielectric Constant, at 10GHz and 22°C per ASTM D2520 3.21
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)
Fungus Resistance, per ASTM G21 Pass
Resistance to Chemicals Excellent

Product Description

  • Humiseal UV500

    HumiSeal® UV500 is a high solids UV dual cure elastomeric acrylate conformal coating. HumiSeal® UV500 exhibits excellent flexibility, moisture resistance and electrical insulation properties as well as good chemical resistance. The formulation allows chemical stripping using a dedicated stripper. HumiSeal® UV500 is tack free after exposure to UV light and the secondary moisture cure mechanism will fully cure any unexposed areas of the coating within 7 days at ambient conditions. Cured HumiSeal® UV500 has a higher flexibility compared to other UV curable conformal coatings, giving improved performance in thermal cycling tests. The coating fluoresces under UV light to allow coating inspection and can be applied by all selective coating equipment. HumiSeal® UV500 is recognized under UL File Number E105698. HumiSeal® UV500 is compliant with EU RoHS Directive 2015/863 and China RoHS 2.

    • Part Number
      • 1 Litre Can: 55927
      • 5 Litre Can: 55213
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density 1.0 to 1.1 g/cm3
Minimum Solids Content

98 %

Viscosity, per Fed-Std-141, Meth. 4287 275 to 375 centipoise
Recommended Coating Thickness 25 – 125 microns
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 6 months
Glass Transition Temperature – DSC – 43°C
Coefficient of Thermal Expansion – TMA 137ppm/°C Below Tg
311ppm/°C Above Tg
Modulus – DMA 0.4MPa @ 25°C
Flammability, per UL-94 V-0
Thermal Conductivity 0.505 W/mK
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Dielectric Constant, at 10GHz per ASTM D2520 3.07
Surface Resistivity per ASTM D-257 2.0 x 1011 ohms
Volume Resistivity per ASTM D-257 8.0 x 1012 ohm.cm
Insulation Resistance, per MIL-I-46058C 4.5 x 1011 ohms
Moisture Insulation Resistance, per MIL-I-46058C 1.6 x 1010 ohms
Surface Insulation Resistance (per IPC J-STD-004 (mod.)) 8.9 log10 ohms
Resistance to Chemicals Good
Fungus Resistance, per IPC-TM-650 2.6.1.1 Pass

Product Description

  • Humiseal UV50-LV

    HumiSeal® UV50LV is a one-part, low viscosity, high solids dual cure acrylated polyurethane conformal coating possessing excellent chemical resistance, flexibility and moisture resistance. HumiSeal® UV50LV has been developed at a low viscosity to allow use with film coater type selective coating equipment. HumiSeal® UV50LV is tack free after exposure to UV light and the secondary moisture cure mechanism will fully cure any unexposed areas of the coating within 7 days at ambient conditions. Cured HumiSeal® UV50LV has a higher flexibility compared to other UV curable conformal coatings, giving improved performance in thermal cycling tests. HumiSeal® UV50LV fluoresces under UV light to allow coating inspection and can be applied by all selective coating equipment. HumiSeal® UV50LV contains no VOCs or solvent. HumiSeal® UV50LV is recognized under UL File Number E105698.

    • Part Number
      • 1 Litre Can: 55932
      • 5 Litre Can: 55098
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density 1.0 to 1.1 g/cm3
Minimum Solids Content

95 %

Viscosity, per Fed-Std-141, Meth. 4287 80 – 120 centipoise
Recommended Coating Thickness 25 – 125 microns
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Glass Transition Temperature – DSC -1°C
Coefficient of Thermal Expansion – TMA 122 ppm/°C Below Tg
264 ppm/°C Above Tg
Modulus – DMA 6.394 MPa @ 25ºC
Flammability, per UL-94 V-0
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Surface Insulation Resistance, per IPC-J-STD-004 (mod.) 8.61 log10 ohms
Surface resistivity (ASTM D-257) 7.4 X 1014 Ohm
Volume resistivity (ASTM D-257) 3.9 X 1013 Ohm X cm
Moisture Insulation Resistance (IPC-CC-830) 3.0 X 109 Ohm
SIR 85C/85RH (7 days, IPC B24) Pass >500MΩ
CTI (ASTM D-3638) PLC=0 (600V)
Thermal Conductivity 0.152 W/m.ºK
Resistance to Chemicals Excellent

Product Description

  • Humiseal UV40-Solar

    HumiSeal® UV40-SOLAR is a single component, low viscosity, high solids conformal coating material that has been formulated for use under prolonged exposure to sunlight, without discoloration or degradation. It meets the requirements of SAE-J-1960 standard (QUV accelerated age testing). In addition, the coating possesses excellent chemical resistance, surface hardness, flexibility, moisture resistance and is tack-free after exposure to UV light. A secondary moisture cure mechanism will cure unexposed areas within 2-3 days at ambient conditions. HumiSeal® UV40-SOLAR is in full compliance with the RoHS Directive 2011/65/EU.

    • Part Number
      • 1 Litre Can: 51451
      • 5 Litre Can: 51796
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density 1.06 g/cm3
Minimum Solids Content

95 %

Maximum Viscosity, per Fed-Std-141, Meth. 4287 650 ± 150 centipoise
Recommended Coating Thickness 25 – 125 microns
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Glass Transition Temperature – DSC 45°C
Coefficient of Thermal Expansion – TMA 85 ppm/°C below Tg
197 ppm/°C above Tg
Modulus – DMA 10364 MPa @ -40°C
4283 MPa @ 25°C
66 MPa @ 80°C
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)
Fungus Resistance, per ASTM G21 Pass

Product Description

  • Humiseal UV40-HV

    HumiSeal® UV40HV is a single component, high solids, UV curable, acrylated polyurethane conformal coating that has been formulated specifically for dispensing and jetting applications. The material possesses excellent chemical resistance, surface hardness, flexibility, moisture resistance and is tack-free after exposure to UV light. A secondary moisture cure mechanism will cure unexposed areas of the coating within 2-3 days at ambient conditions. The coating fluoresces under UV light to allow coating inspection. HumiSeal® UV40HV is in full compliance with the RoHS Directive 2011/65/EU.

    • Part Number
      • 1 Litre Can: 51459
      • 5 Litre Can: 51795
    • Next day delivery in stock items ordered before 4.30pm

      Exclusive UK Partner

Product Specification

Density 1.05 – 1.15 g/cm3
Minimum Solids Content

95 %

Viscosity, per Fed-Std-141, Meth. 4287 3,700 +/- 1,300 centipoise
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Recommended Stripper ** HumiSeal® Stripper 1100
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Glass Transition Temperature – DSC 45°C
Coefficient of Thermal Expansion – TMA 85 ppm/°C below Tg
197 ppm/°C above Tg
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)
Fungus Resistance, per ASTM G21 Pass