Humiseal Syringes/Gels

Exclusive UK Partner

Delivery

Next day delivery on in stock items ordered before 4.30pm

 

Product Description

  • Humiseal Acrylic Gel Syringe

    HumiSeal® Acrylic Gel is a fast drying, single component, thixotropic acrylic paste that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® Acrylic Gel has been designed for use with our acrylic conformal coatings. HumiSeal® Acrylic Gel can be used for sealing, damming and to provide an extra level of protection around component leads. HumiSeal® Acrylic Gel fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® Acrylic Gel is in full compliance with the RoHS Directive 2002/95/EC.

Product Specification

Density, per ASTM D1475 0.95 ± 0.02 g/cm3
VOC 699 grams/litre
Recommended Thickness ≤ 3mm
Tack Free Time 10 min @ 80°C
Recommended Curing Conditions 3 hrs @ 80°C
Time Required to Reach Optimum Properties 7 days
Recommended Stripper HumiSeal® Stripper 1080, 1080EU
Shelf Life at Room Temperature, DOM 12 months
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)

Product Description

  • Humiseal Acrylic Gel

    HumiSeal® Acrylic Gel is a fast drying, single component, thixotropic acrylic paste that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® Acrylic Gel has been designed for use with our acrylic conformal coatings. HumiSeal® Acrylic Gel can be used for sealing, damming and to provide an extra level of protection around component leads. HumiSeal® Acrylic Gel fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® Acrylic Gel is in full compliance with the RoHS Directive 2002/95/EC.

Product Specification

Density, per ASTM D1475 0.95 ± 0.02 g/cm3
VOC 699 grams/litre
Recommended Thickness ≤ 3mm
Tack Free Time 10 min @ 80°C
Recommended Curing Conditions 3 hrs @ 80°C
Time Required to Reach Optimum Properties 7 days
Recommended Stripper HumiSeal® Stripper 1080, 1080EU
Shelf Life at Room Temperature, DOM 12 months
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 5.5 x 1014 ohms (550TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 7.0 x 1010 ohms (70GΩ)

Product Description

  • Humiseal UV40 Syringe

    HumiSeal® UV40 is a single component, high solids, UV curable, acrylated polyurethane conformal coating that possesses excellent chemical resistance, surface hardness, flexibility and moisture resistance. The material is tackfree after exposure to UV light. A secondary moisture cure mechanism will cure unexposed areas of the coating within 2-3 days at ambient conditions. The coating fluoresces under UV light to allow for coating inspection and can be applied by selective coating equipment. HumiSeal® UV40 coating is recognized under UL File Number E105698, and is MIL-I-46058C qualified, and IPC-CC-830 and RoHS Directive 2011/65/EC compliant.

Product Specification

Density 1.10 ± 0.05 g/cm3
Minimum Solids Content

95 %

Viscosity, per Fed-Std-141, Meth. 4287 650 ± 150 centipoise
Recommended Coating Thickness 25 – 125 microns
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Recommended Stripper** HumiSeal® Stripper 1100
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Glass Transition Temperature – DSC 45°C
Coefficient of Thermal Expansion – TMA 85 ppm/°C Below Tg
197 ppm/°C Above Tg
Modulus – DMA 10360 MPa @ -40ºC
4280 MPa @ 25ºC
66 MPa @ 80ºC
Flammability, per UL-94 V-0
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dielectric Constant, at 10GHz and 22°C per ASTM D2520 3.21
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)
Fungus Resistance, per ASTM G21 Pass
Resistance to Chemicals Excellent

Product Description

  • Humiseal UV40-HV Syringe

    HumiSeal® UV40HV is a single component, high solids, UV curable, acrylated polyurethane conformal coating that has been formulated specifically for dispensing and jetting applications. The material possesses excellent chemical resistance, surface hardness, flexibility, moisture resistance and is tack-free after exposure to UV light. A secondary moisture cure mechanism will cure unexposed areas of the coating within 2-3 days at ambient conditions. The coating fluoresces under UV light to allow coating inspection. HumiSeal® UV40HV is in full compliance with the RoHS Directive 2011/65/EU.

Product Specification

Density 1.05 – 1.15 g/cm3
Minimum Solids Content

95 %

Viscosity, per Fed-Std-141, Meth. 4287 3,700 +/- 1,300 centipoise
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Recommended Stripper ** HumiSeal® Stripper 1100
Thermal Shock, 50 cycles per MIL-I-46058C -65°C to 125°C
Glass Transition Temperature – DSC 45°C
Coefficient of Thermal Expansion – TMA 85 ppm/°C below Tg
197 ppm/°C above Tg
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)
Fungus Resistance, per ASTM G21 Pass

Product Description

  • Humiseal UV40 Gel Syringe

    HumiSeal® UV40 Gel is a single component, high solids, UV curable gel. A secondary moisture cure mechanism will cure unexposed areas within 7 days at ambient conditions. The gel fluoresces under UV light to allow inspection. HumiSeal® UV40 Gel is in full compliance with the RoHS Directive 2011/65/EU.

Product Specification

Density 1.06 g/cm3
Minimum Solids Content

95 %

Recommended Coating Thickness* Up to 2.0 mm
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)

Product Description

  • Humiseal 1A33 Gel

    HumiSeal® 1A33 Gel is a single component thixotropic polyurethane paste, suitable for general printed circuit board applications. HumiSeal® 1A33 Gel contains no free isocyanates. HumiSeal® 1A33 Gel fluoresces under UV light for easy inspection. HumiSeal® 1A33 Gel is in full compliance with the RoHS 2011/65/EU Directive.

Product Specification

Solids Content, % by weight per Fed-Std-141, Meth. 4044 44 ± 2 %
VOC 521 grams/litre
Optional Curing Conditions to Reach Optimum Properties 30 days at RT
30 hours @ 76°C
20 hours @ 87°C
Dielectric Withstand Voltage, per MIL-I-46058C (mod.) > 5000V
Dielectric Breakdown 42 KV/mm
Recommended Stripper HumiSeal® Stripper 1063
Shelf Life at Room Temperature, DOM 24 months

Product Description

  • Humiseal S1063 Gel

    HumiSeal® Stripper 1063 GEL is a non-acidic, non-destructive stripper that dissolves cured HumiSeal® polyurethane coatings without negatively affecting printed wiring board substrates or components. HumiSeal® Stripper 1063 GEL is in full compliance with the RoHS Directive 2002/95/EC.

Product Specification

Stripper 1063 GEL
Compatible HumiSeal® Coatings 1A27 & 1A33 Families
Relative Evaporating Rate (BuAc=1)

Viscosity (cps)

NA

12000 ± 8000

Specific Gravity 0.84 ± 0.02
Flash Point (°C) TCC 11.1
Shelf Life, DOM 12 months
Colour Clear

Product Description

  • Humiseal UV40 Gel

    HumiSeal® UV40 Gel is a single component, high solids, UV curable gel. A secondary moisture cure mechanism will cure unexposed areas within 7 days at ambient conditions. The gel fluoresces under UV light to allow inspection. HumiSeal® UV40 Gel is in full compliance with the RoHS Directive 2011/65/EU.

Product Specification

Density 1.06 g/cm3
Minimum Solids Content

95 %

Recommended Coating Thickness* Up to 2.0 mm
Recommended UV Cure* See curing section below
Shelf Life at Room Temperature, DOM 12 months
Dielectric Withstand Voltage, volts per MIL-I-46058C >1500 volts
Dielectric Constant, at 1MHz and 25°C per ASTM D150-98 2.5
Dissipation Factor, at 1MHz and 25°C per ASTM D150-98 0.01
Insulation Resistance, per MIL-I-46058C 8.0 x 1014 ohms (800TΩ)
Moisture Insulation Resistance, per MIL-I-46058C 4.7 x 1010 ohms (47GΩ)