Humiseal Thinners
Exclusive UK Partner
Delivery
Next day delivery on in stock items ordered before 4.30pm
Product Description
-
-
Humiseal 505 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes, using a compatible thinner from the table below. HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.
-
Part Number
- 1 Litre Can: 55201
- 5 Litre Can: 55049
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 64 | 73 | 503 | 505 | 521 | 535 |
Compatible HumiSeal® Coatings |
2A64 | 1B73 | 1B12, 1B31, 1B66, 1B73 |
1R32, 1R32A-2 |
1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1R32 |
2A53 |
Relative Evaporating Rate (BuAc=1) |
0.89 | 1.0 | 3.77 | 1.65 | 0.60 | 1.50 |
Specific Gravity | 0.95 ± 0.01 | 0.88 ± 0.01 | 0.85 ± 0.01 | 0.83 ± 0.01 | 0.87 ± 0.01 | 0.87 ± 0.01 |
Boiling Point (°C) |
110 | 127 | 82 | 117 | 137 | 110 |
Vapour Pressure (mmHg) |
9.1 | 8.0 | 45.4 | 15 | 19.4 | 45.4 |
Vapour Density (Air=1) |
3.4 | 4.0 | 4.0 | 3.5 | 3.6 | 4.0 |
Flash Point (°C) TCC |
5 | 27 | -1 | 14 | 27 | 5 |
VOC (grams/litre) |
950 | 882 | 850 | 830 | 868 | 868 |
Shelf Life, DOM | 24 months | |||||
Colour | Clear |
Product Description
-
-
Humiseal 503 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes, using a compatible thinner from the table below. HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.
-
Part Number
- 1 Litre Can: 51338
- 5 Litre Can: 51340
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 64 | 73 | 503 | 505 | 521 | 535 |
Compatible HumiSeal® Coatings |
2A64 | 1B73 | 1B12, 1B31, 1B66, 1B73 |
1R32, 1R32A-2 |
1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1R32 |
2A53 |
Relative Evaporating Rate (BuAc=1) |
0.89 | 1.0 | 3.77 | 1.65 | 0.60 | 1.50 |
Specific Gravity | 0.95 ± 0.01 | 0.88 ± 0.01 | 0.85 ± 0.01 | 0.83 ± 0.01 | 0.87 ± 0.01 | 0.87 ± 0.01 |
Boiling Point (°C) |
110 | 127 | 82 | 117 | 137 | 110 |
Vapour Pressure (mmHg) |
9.1 | 8.0 | 45.4 | 15 | 19.4 | 45.4 |
Vapour Density (Air=1) |
3.4 | 4.0 | 4.0 | 3.5 | 3.6 | 4.0 |
Flash Point (°C) TCC |
5 | 27 | -1 | 14 | 27 | 5 |
VOC (grams/litre) |
950 | 882 | 850 | 830 | 868 | 868 |
Shelf Life, DOM | 24 months | |||||
Colour | Clear |
Product Description
-
-
Humiseal 521 EU Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes. HumiSeal® Thinner 521 EU is specially formulated to maintain the original system balance when added to the correct coating type. HumiSeal® Thinner 521 EU has been formulated for sale in the European Union and is in full compliance with the RoHS Directive 2011/65/EU.
-
Part Number
- 1 Litre Can: 55071
- 5 Litre Can: 55074
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner |
521 EU |
Compatible HumiSeal® Coatings |
1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1R32 |
Relative Evaporating Rate (BuAc=1) |
0.60 |
Specific Gravity |
0.86 ± 0.01 |
Boiling Point (°C) |
137 – 140 |
Vapour Pressure (mmHg) |
18.0 |
Vapour Density (Air=1) | 3.6 |
Flash Point (°C) TCC | 30 |
VOC (grams/litre) | 860 |
Shelf Life, DOM | 24 months |
Colour | Clear |
Product Description
-
-
Humiseal 600 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes. HumiSeal® Thinner 521 EU is specially formulated to maintain the original system balance when added to the correct coating type. HumiSeal® Thinner 521 EU has been formulated for sale in the European Union and is in full compliance with the RoHS Directive 2011/65/EU.
-
Part Number
- 1 Litre Can: 51348
- 5 Litre Can: 51350
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 24 | 600 | 604 | 605 | 701 | 704 | 800 | 801 |
Compatible HumiSeal® Coatings | 1A65 |
1A67 |
1B31EPA 1B73EPA | 1B31EPA (Not For Use With 1B73EPA) |
1B31LOC 1B66LOC 1B73EPA 1B73LOC | 1A20 1B31 | 1B31LSE 1B73LSE | 1B31LSE 1B73LSE |
Relative Evaporating Rate (BuAc=1)
Specific Gravity |
3.62
0.85±0.01 |
0.37
0.97±0.01 |
0.30
0.93±0.01 |
3.18
0.70±0.01 |
1.33
1.27 ±0.03 |
1.26
1.12±0.01 |
2.78
0.86±0.01 |
2.04
0.87 ±0.01 |
Boiling Point (°C)
Vapour Pressure (mmHg) |
82
45.4 |
141
3.8 |
141
3.8 |
98
85 |
140
3.8 |
140
3.8 |
98
34 |
119
26 |
Vapour Density (Air=1) | 4.0 | 4.6 | 4.6 | 2.0 | 4.6 | 4.6 | 4.0 | 4.2 |
Flash Point (°C) TCC
VOC (grams/litre) |
30
847 |
47
969 |
12
930 |
-1
702 |
22
127 |
22
0 |
16
< 17 |
16
250 |
Shelf Life, DOM | 24 months | |||||||
Colour | Clear |
Product Description
-
-
Humiseal 604 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes. HumiSeal® Thinner 521 EU is specially formulated to maintain the original system balance when added to the correct coating type. HumiSeal® Thinner 521 EU has been formulated for sale in the European Union and is in full compliance with the RoHS Directive 2011/65/EU.
-
Part Number
- 1 Litre Can: 51351
- 5 Litre Can: 51354
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 24 | 600 | 604 | 605 | 701 | 704 | 800 | 801 |
Compatible HumiSeal® Coatings | 1A65 |
1A67 |
1B31EPA 1B73EPA | 1B31EPA (Not For Use With 1B73EPA) |
1B31LOC 1B66LOC 1B73EPA 1B73LOC | 1A20 1B31 | 1B31LSE 1B73LSE | 1B31LSE 1B73LSE |
Relative Evaporating Rate (BuAc=1)
Specific Gravity |
3.62
0.85±0.01 |
0.37
0.97±0.01 |
0.30
0.93±0.01 |
3.18
0.70±0.01 |
1.33
1.27 ±0.03 |
1.26
1.12±0.01 |
2.78
0.86±0.01 |
2.04
0.87 ±0.01 |
Boiling Point (°C)
Vapour Pressure (mmHg) |
82
45.4 |
141
3.8 |
141
3.8 |
98
85 |
140
3.8 |
140
3.8 |
98
34 |
119
26 |
Vapour Density (Air=1) | 4.0 | 4.6 | 4.6 | 2.0 | 4.6 | 4.6 | 4.0 | 4.2 |
Flash Point (°C) TCC
VOC (grams/litre) |
30
847 |
47
969 |
12
930 |
-1
702 |
22
127 |
22
0 |
16
< 17 |
16
250 |
Shelf Life, DOM | 24 months | |||||||
Colour | Clear |
Product Description
-
-
Humiseal 673 Thinner
The use of HumiSeal coatings may be required, at times, to lower the viscosity of the product as received from the factory. This can be readily achieved by adding to the coating a pre-determined amount of HumiSeal Thinner assigned to the particular type of HumiSeal coating used. HumiSeal thinners are blends of solvents and diluents, which are carefully formulated to maintain the original optimum system balance when added to the corresponding coating type.
-
Part Number
- 1 Litre Can: 55916
- 5 Litre Can: 51355
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
THINNER NO. |
673 |
CHEMICAL TYPE | Ketone/Ester |
Relative Evapouration rate (BuAC = 1) | 2.1 |
Specific Gravity | 0.89 |
Boiling Point °C | 141 |
Vapour Pressure (mmHg) | 49 |
Vapour density (Air =1) | 3.5 |
Flash point °C (TCC) | -9 |
Shelf Life | 18 months |
Colour | Clear |
Product Description
-
-
Humiseal 64 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes, using a compatible thinner from the table below. HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.
-
Part Number
- 1 Litre Can: 51604
- 5 Litre Can: 51358
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 64 | 73 | 503 | 505 | 521 | 535 |
Compatible HumiSeal® Coatings |
2A64 | 1B73 | 1B12, 1B31, 1B66, 1B73 |
1R32, 1R32A-2 |
1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1R32 |
2A53 |
Relative Evaporating Rate (BuAc=1) |
0.89 | 1.0 | 3.77 | 1.65 | 0.60 | 1.50 |
Specific Gravity | 0.95 ± 0.01 | 0.88 ± 0.01 | 0.85 ± 0.01 | 0.83 ± 0.01 | 0.87 ± 0.01 | 0.87 ± 0.01 |
Boiling Point (°C) |
110 | 127 | 82 | 117 | 137 | 110 |
Vapour Pressure (mmHg) |
9.1 | 8.0 | 45.4 | 15 | 19.4 | 45.4 |
Vapour Density (Air=1) |
3.4 | 4.0 | 4.0 | 3.5 | 3.6 | 4.0 |
Flash Point (°C) TCC |
5 | 27 | -1 | 14 | 27 | 5 |
VOC (grams/litre) |
950 | 882 | 850 | 830 | 868 | 868 |
Shelf Life, DOM | 24 months | |||||
Colour | Clear |
Product Description
-
-
Humiseal 701 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes, using a compatible thinner from the table below. HumiSeal® Thinners are blends of solvents formulated to maintain and preserve the original system benefits. These HumiSeal® Thinners comply with North American air quality regulations and the RoHS Directive 2011/65/EC.
-
Part Number
- 1 Litre Can: 51415
- 5 Litre Can: 51418
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 24 | 600 | 604 | 605 | 701 | 704 | 800 | 801 |
Compatible HumiSeal® Coatings | 1A65 |
1A67 |
1B31EPA 1B73EPA | 1B31EPA (Not For Use With 1B73EPA) |
1B31LOC 1B66LOC 1B73EPA 1B73LOC | 1A20 1B31 | 1B31LSE 1B73LSE | 1B31LSE 1B73LSE |
Relative Evaporating Rate (BuAc=1)
Specific Gravity |
3.62
0.85±0.01 |
0.37
0.97±0.01 |
0.30
0.93±0.01 |
3.18
0.70±0.01 |
1.33
1.27 ±0.03 |
1.26
1.12±0.01 |
2.78
0.86±0.01 |
2.04
0.87 ±0.01 |
Boiling Point (°C)
Vapour Pressure (mmHg) |
82
45.4 |
141
3.8 |
141
3.8 |
98
85 |
140
3.8 |
140
3.8 |
98
34 |
119
26 |
Vapour Density (Air=1) | 4.0 | 4.6 | 4.6 | 2.0 | 4.6 | 4.6 | 4.0 | 4.2 |
Flash Point (°C) TCC
VOC (grams/litre) |
30
847 |
47
969 |
12
930 |
-1
702 |
22
127 |
22
0 |
16
< 17 |
16
250 |
Shelf Life, DOM | 24 months | |||||||
Colour | Clear |
Product Description
-
-
Humiseal 73 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes, using a compatible thinner from the table below. HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.
-
Part Number
- 1 Litre Can: 51359
- 5 Litre Can: 51362
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 64 | 73 | 503 | 505 | 521 | 535 |
Compatible HumiSeal® Coatings |
2A64 | 1B73 | 1B12, 1B31, 1B66, 1B73 |
1R32, 1R32A-2 |
1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1R32 |
2A53 |
Relative Evaporating Rate (BuAc=1) |
0.89 | 1.0 | 3.77 | 1.65 | 0.60 | 1.50 |
Specific Gravity | 0.95 ± 0.01 | 0.88 ± 0.01 | 0.85 ± 0.01 | 0.83 ± 0.01 | 0.87 ± 0.01 | 0.87 ± 0.01 |
Boiling Point (°C) |
110 | 127 | 82 | 117 | 137 | 110 |
Vapour Pressure (mmHg) |
9.1 | 8.0 | 45.4 | 15 | 19.4 | 45.4 |
Vapour Density (Air=1) |
3.4 | 4.0 | 4.0 | 3.5 | 3.6 | 4.0 |
Flash Point (°C) TCC |
5 | 27 | -1 | 14 | 27 | 5 |
VOC (grams/litre) |
950 | 882 | 850 | 830 | 868 | 868 |
Shelf Life, DOM | 24 months | |||||
Colour | Clear |
Product Description
-
-
Humiseal 905 Thinner
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes, using a compatible thinner from the table below. HumiSeal® Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2002/95/EC.
-
Part Number
- 1 Litre Can: 51366
- 5 Litre Can: 51370
-
Next day delivery in stock items ordered before 4.30pm
Exclusive UK Partner
-
Product Specification
Thinner | 903 | 904 | 905 |
Compatible HumiSeal® Coatings |
1B51NS, 1B51NSLU |
1B51NS, 1B51NSLU |
1B51NS, 1B51NSLU |
Relative Evaporating Rate (BuAc=1) |
>1 | >1 | 3.00 |
Specific Gravity | 0.78 ± 0.01 | 0.77 ± 0.03 | 0.77 ± 0.01 |
Boiling Point (°C) |
115 | 110 | 101 |
Vapor Pressure (mmHg) | 34.0 | 2.8 | 2.8 |
Vapor Density (Air=1) |
3.7 | 4.0 | 4.0 |
Flash Point (°C) TCC |
-1 | -6 | -6 |
VOC (grams/litre) |
775 | 770 | 770 |
Shelf Life, DOM | 24 months | ||
Colour | Clear |