Ambersil Galva Colour is a zinc-phosphate enhanced paint designed to prime and paint in just one application. The product is specially formulated to adhere to even the most difficult surfaces, including where residual old paint or corrosion are present. Ambersil Galva Colour will provide protection and coverage for a smooth, long-lasting finish.Thanks to its RAL-referenced top-coat paint colours, Ambersil Galva Colour ensures accurate colour matching and allows for seamless touch-ups. With a dry-to-touch time of just 20 to 30 minutes, and a curing time of about 6 hours, Ambersil Galva Colour offers a quick and easy way to achieve a professional finish, without the hassle of long drying times.
2-in-1 formula reduces time spent priming and painting the top-coat
Effective on surfaces where rust or old paint are present
Ideal for external pipe-line identification, railings, security fences, and storage tanks
RAL-referenced colours for accurate colour matches
Contains no heavy metals
Touch dry in 20-30 minutes, fully cured in 6 hours
How to use Ambersil Galva Colour 2-in-1 Primer and Paint:
Shake aerosol can until the agitator ball moves freely in the can.
Apply a thin, even film of Ambersil Galva Colour from a distance of 20-30 cm.
Additional coats can be applied after 15-20 minutes.
For best results, apply 2 lighter coats rather than 1 heavy.
Storage
Store Ambersil Galva Colour in the unopened container in a dry location. Preferably store at room temperature. In any case, store under 50°C and away from direct heat and open flame. Shelf life of the product is no less than 6 years if properly stored.This product is categorised as FLAMMABLE and must be stored in compliance with relevant regulations.
