Humiseal 1063 Gel Conformal Coating
£159.45
HumiSeal Stripper 1063 GEL is a non-acidic, non-destructive stripper that dissolves cured HumiSeal polyurethane coatings without negatively affecting printed wiring board substrates or components.
Free shipping on orders over £75
Same day dispatch if you place your order before 3.30pm
Manufacturer CofC available at checkout
HumiSeal Stripper 1063 is:
- used to strip 1A27 and 1A33 urethane families.
- compliant with RoHS directive 2015/863/EU
- safe for use on printed circuit board assemblies.
Stripper 1063 has:
- flammable ingredients
The use of heat is not required for use with HumiSeal Stripper 1063. A fully cured urethane coating of nominal thickness will typically dissolve readily within 30 to 60 minutes upon contact with HumiSeal Stripper 1063. It is important to thoroughly clean the assembly after the conformal coating removal process. Following the cleaning process, the assembly should be baked to remove residual moisture for a minimum of 30 minutes at 60 – 65°C.
| Stripper | 1063 GEL |
| Compatible HumiSeal Coatings | 1A27 & 1A33 Families |
| Relative Evaporating Rate (BuAc=1)
Viscosity (cps) |
NA
12000 ± 8000 |
| Specific Gravity | 0.84 ± 0.02 |
| Flash Point (°C) TCC | 11.1 |
| Shelf Life, DOM | 12 months |
| Colour | Clear |
-
1063-TDS.pdf
Size: 0.00
Type: pdf
-
1063-GEL-SDS.pdf
Size: 0.00
Type: pdf
Delivery info
Shipment method | Shipment cost |
Click and Collect | FREE |
Next day (orders above £75.00 ex.vat) | FREE |
Next day (orders below £75.00 ex.vat) | £6.99 |
Next day pre 12AM | £17.99 |
Next day pre 10AM | £20.99 |
Saturday AM | £45.00 |
Be the first to review “Humiseal 1063 Gel Conformal Coating”
Related products
Reviews
There are no reviews yet.